20 Most Recent Canon PIXMA MP180 All-In-One InkJet Printer Questions & Answers

It means that yo have a problem in your cartridge here are some steps how to reset your printer cartridge.
  • Power off the printer
  • Hold the stop/reset button then press and hold power (for 5 secs)
  • Hold Power and release the stop/reset button
  • Press the stop/reset button twice
  • Release power button
  • Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
  • On the 3rd press the inicator should be orange.
  • Press the power button to set data
  • To set data remove cartridges then replace.leave for 20 or 30 secs
  • Press the power button again to shut down
  • Then press power button to power up.
  • The printer will feed one piece of paper through then set language and counrty.
Then ink should be reset
Good Luck..

Canon PIXMA ... | Answered on May 20, 2019

Canon PIXMA MP180 All-In-One InkJet Printer
Error 5B00

Canon PIXMA ... | Answered on May 09, 2019

Hello, your error is about the ink absorber.

"Ink absorber full Japan:
P07 The ink absorber
becomes full.
Replace the ink absorber (ink absorber kit), and
reset the ink absorber counter."

This is the way to enter service mode:
"Start the printer in the service mode.
i. With the machine power turned off, while pressing the Stop/Reset button, press and hold
the ON button. (DO NOT release the buttons).
ii. When the Power LED lights in green, while holding the ON button, release the Stop/Reset
button. (DO NOT release the ON button.)
iii. While holding the ON button, press the Stop/Reset button 5 times, and then release both
the ON and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm
and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
iv. When the Power LED lights in green, the machine is ready for the service mode operation
and "0" is displayed on the 7-segment LCD.
2) Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During
operation of the selected function, all the Service Tool buttons are dimmed and inactive.
ii When the operation is completed, "A function was finished." is displayed, and another
function can be selected.
iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message
dialog box to exit the error."

You can use the service tool to reset this error after you have enter service mode.
here is the service tool:

Canon PIXMA ... | Answered on Sep 03, 2018

Search online "error code p7, canon MP 280 .

Canon PIXMA ... | Answered on Jul 10, 2015

there is setting for it search in file setting in scan dialog box

show add page dialog after scanning.

Canon PIXMA ... | Answered on Mar 28, 2015

One of two things I can suggest:

1. make sure you are not scanning in JPEG or TIFF format as these are typically single page documents only. PDF is your best option for scanning.

2. Check settings, as some scanning software has an option that you can turn on or off depending on whether you want a single file with all pages or multiple files each containing a page.

Canon PIXMA ... | Answered on Mar 10, 2015

press and hold stop/reset 5 second. :)

hope will works by Service printer jepara

Canon PIXMA ... | Answered on Oct 10, 2014

I have an Canon Pixma MP280 with an error e05 on it can someone tell me what it is and how i can fix it

Canon PIXMA ... | Answered on May 17, 2014

Do not but Canon. These printers fail even if you put new cartridges

Canon PIXMA ... | Answered on Jan 23, 2014

my error code is P7.

Canon PIXMA ... | Answered on Dec 24, 2013

This sounds like an ink pad warning.

Try resetting this.

Canon PIXMA ... | Answered on Dec 12, 2013

You may want to "fan" the stack of papers (hold them firmly on one side of the papers and use the other hand to "fan" the other side) before putting in the tray. A lot of time the humidity causes the sheets of paper to stick together which causes the printer to take more than one sheets of paper. Also, make sure that you have plenty of papers in the tray.

Canon PIXMA ... | Answered on Nov 29, 2013

For error e 1 4 = better take it out and wipe the smudges
for error e 0 5 = check the ink catridge, when ciss installed most installer make mistake by making the red ink hole at the circle made on it. you must make the hole slightly under it, the small hole. the big round is under the thick plastic lid, so the pipe we put will make the catridge move from the original position. or your cartridge just spoilt.

Canon PIXMA ... | Answered on Aug 10, 2013

r u sure that is e6?

There are bunch of error code for canon.

Pls check below and re-list your exact error code and can help you.

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 ? Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error ? USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error1

Canon PIXMA ... | Answered on Jul 03, 2013

Not finding what you are looking for?
Canon PIXMA  MP180 All-In-One InkJet Printer Logo

285 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2312 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • PIXMA Canon

Most Popular Question

error code 5200

  • Office Equipment & Supplies