Problem! Hi im trying to print out a 10cm by 12cm image on epson DX6000 but it is only printing out sections of the image. Why is this? I have set my print margains correctly. Thanks  Gemma

Look here for downloads and operating manual
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-DX6000-All-in-One-printer/Drivers-Support;jsessionid=C4B6A905CAFCE6C5C28AA5BEEFABFD62.acc8-new

Here is a full detailed explanation on how you can avoid Epson printer skipping lines

https://www.errorsdoc.com/epson/how-to-fix-epson-printer-printing-with-lines-missing-or-printer-skipping-lines-issues/

try

• How do I print using only the black ink and not the other colors?
• How do I set the scanning method for the Black or Color buttons?

Hi

Chances are the mechanism to recognize the ink cartridges is already damage and it may cause a lot having it replaced. I suggest to get a new printer instead specially if you have tried reseating the ink cartridges several times and won't work still.

Thanks for using Fixya

try to perform a cleaning cycle, if your running on windows just go to the control panel look for printers and faxes, find your printer icon then right click once left click on printing preferences, left click on the maintenance tab then click on head cleaning for about 3 to 4 times in a row. then check for a test print and see if it still persist.

Hi, Go in the printer section under Control panel. Right click Epson 10000 icon, than Properties. Go to Ports. Click the port it is using. Configure port. Protocol must be LPR Queue name under LPR settings: type: print (small letters) Check LPR counting enabled box.
Try. It should work.

try to configure the setting of ur printer

Hi nick, I would suggest you update your printer drivers, try this, it should help:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop(watch for the light yellow bar at the top of window viewing pane, click on this and choose – download file - . Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done.


anaanymous


Rate Me Please! Hate it? Rate it…Like it, try it!
Thank you for submitting your question to FixYa.com
Would you please take a moment and show your appreciation by rating my performance.
All ratings and comments are welcome. Thank you - anaanymous

Hi, its unfortunate that you've experience that issue with your printer. The best possible solution that we can offer to you is to run a series of head cleaning. Just to make sure that you have try the most effective head cleaning please use the maintenance or utility section of this printer. After each head cleaning you need to print a nozzle pattern just to confirm it the head cleaning is successful. After third head cleaning and the issue still present. Reseat the ink cartridge. If issue still present after trying those steps, it only means that you need to call your printer manufacturer and ask for service referral or exercise the warranty options of your printer.

Tirzo

hi-

Actually what i can suggest is that for you to try printing from a different application, such as microsoft word or paint. try printng a landscape image. now if its going to print it correctly call adobe since that might be an application issue. thanks for using fixya!!