LG 32LD550 32 in. LCD HDTV Logo
j
jennifer tyler Posted on Nov 20, 2014
Answered

Light on bottom just stay red

Tried different outlets---unplugging everthing Stays red. "on" button or remote--nothing turns red to blue

Answer This Question
  • jennifer tyler
    jennifer tyler Nov 21, 2014

    TV will not turn on.

×

2 Answers

Lorenzo Carter

Lorenzo Carter

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Mar 31, 2016
Lorenzo Carter
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Nov 07, 2015
Answers
1
Questions
0
Helped
572
Points
2

I have a new power supply and my light stay solid red on my LG tv. Has anyone experienced this. I ordered the power supply from Sears. Someone please help a brother.
Light on bottom just stay red - 3_31_2016_12_41_03_am.jpg

  • Lorenzo Carter
    Lorenzo Carter Mar 31, 2016

    I have a new power supply and my light stay solid red on my LG tv. Has anyone experienced this. I ordered the power supply from Sears. Someone please help a brother.

×

randymsw1

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 12 Answers
  • Posted on Nov 21, 2014
randymsw1
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Jan 11, 2008
Answers
12
Questions
0
Helped
4706
Points
32

Are you telling us that your TV does NOT turn on, or are you just wondering why the light does not change when the TV is on?

  • jennifer tyler
    jennifer tyler Nov 21, 2014

    TV will not turn on.

  • randymsw1 Nov 21, 2014

    Sounds like it needs to go to the shop to be repaired.

×

Ad

5 Related Answers

dave1645

Dave Naylor

  • 834 Answers
  • Posted on Nov 06, 2009

SOURCE: lg 26lg30 light blinks red blue wont turn on.

you have a bad cap in the power supply
these are can shaped device thet if bad will vent anf put up on the top the valoue is wrtten on the side trplace them and you should be good to go

Ad

Anonymous

  • 508 Answers
  • Posted on Jun 25, 2009

SOURCE: red blinking light can't turn on tv

call lg

Chi Chu

  • 8457 Answers
  • Posted on Jan 05, 2010

SOURCE: lg 50 in clicks but won't stay on.

Ur power board need it replaced,LED indicator light not sustaning power.

Anonymous

  • 1 Answer
  • Posted on Mar 21, 2010

SOURCE: LG 26lx1d tv will not turn on. Power supply is

Have an LG26Lx1D for about 3 years, dropped off by my son.(Figures).Power light just blinking, but went back to red.Removed back panel, and metal cover. Just above antenna/cable input, its a small fan,mine was full of dirt. Blow off dirt, and make sure its turning freely.
Install back the covers, an voila....its a miracle...its working again.
Good luck

Jaime Hernandez

  • 2351 Answers
  • Posted on Sep 24, 2010

SOURCE: My LG Plasma 42PC3D turns on and off repeatedly. I

Your plasma TV has a power supply 6709900019A. These power supplies failed due to defective capacitors. See the picture below and check the capacitors mark with the red lines. There are 10 capacitors that should be replaced even if they do not show signs of bulging/swelling on top.
The value of the capacitors is 3300uF/10V but you can use 25 volts as long as they fit in the space provided by design.


4c29d64.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Vibe bluetooth earbuds wont charge
That's a shame. However, this query is more for a forum dealing with audio equipment - this forum is for Cameras.
Read full answer
Sep 18, 2017 • Cameras
0helpful
1answer

The red light stays on but the power button or remote will not turn on tv. I unplugged for over night amd plugged it about 12 hours later and the red light on bottom stays on but the tv will not tun on via...
Chances are some static electricity got into the TV from the power line and damaged the power board
Read full answer
Dec 22, 2017 • AOC L32W861 32 in. LCD TV
1helpful
1answer

My Olevia 37" LCD HDTV suddenly will not turn on.
power supply board is damaged,only working with standby power
Read full answer
Aug 15, 2011 • Olevia LT37HVS 37 in. LCD HDTV
8helpful
1answer

I can't seem to sync my wii controller. All 4 lites are blinking and will not stop. I changed the batteries and tried to re-sync the controller w/no luck. It was just working a few minutes ago.
    Try these steps!

  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.


  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.


  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

    1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.


    2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.


    3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).


    4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).


    5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.
 if nothing else works call 1-800-255-3700
Read full answer
Jul 12, 2011 • Nintendo Wii Remote Controller
0helpful
1answer

Standby light stays red and will not turn unit on.
Try to reset the macroprocessor. Unplug the unit from AC, hold both buttons SPEAKER A and SPEAKER B and plug the cord in outlet. After display flashes several times release the buttons. No result? - repair shop.
Read full answer
Apr 05, 2009 • Denon AVR-1906 Receiver
0helpful
1answer

No power
your on off switch button need to replace or try to spray contact cleaner then press on and off a few time and pls unplug the power cable first ok
Read full answer
Mar 24, 2009 • Televison & Video
0helpful
1answer

Remote does not respond
Have you tried re-sync-ing the remote?

    Try these steps!

  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

    1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

    4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
    5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.

Read full answer
Mar 19, 2009 • Nintendo Wii Console
0helpful
1answer

Piece of s@#t!
the button at the bottom that says c lock. at first i thought it meant clock but if you look closely, press it twice. hope this helps
Read full answer
Jul 18, 2008 • Televison & Video
0helpful
1answer

Wii fit
Have had this problem before with wii sports. What I did was turn off the wii console and unplug from the power, leave for a few seconds then turn it back on when the health & safety screen comes up
  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.


  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:
  4. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

  5. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

  6. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

  7. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
Read full answer
Jun 23, 2008 • Nintendo Wii Console
3helpful
3answers

Piece of s@#t!
Sounds like you  accidentally "set" the parental lock while you were sleeping.

Try this trick: (may or may not work)

aim the remote at the TV "IR sensor", hold down "display button" on the remote for 10 seconds to erase or clear the password.

"IF" this works go into the menu and "TURN OFF" parental control.
Read full answer
Oct 20, 2007 • Akai CTD-1390 TV
Not finding what you are looking for?

View Most Popular

32LD550 32 in. LCD HDTV

  • Televison & Video

Related Question

Vibe bluetooth earbuds wont charge

  • Cameras

Related Topics

582 views

Ask a Question

Usually answered in minutes!

Popular Questions

42 inch LG Plasma TV - Lost picture

LG RU-42PX10 42 in. HD-Ready Plasma...

LG LCD TV Model 42LB5D. The closed caption option is greyed out. Help please.

LG 37LP1D 37 in. LCD Television

LG LCD HDTV 'NO SIGNAL'

LG 42LC2D 42 in. LCD HDTV

42 in LG LCD TV turns off by itself

LG 42LC2D 42 in. LCD HDTV

LG flat screen TV speakers make a vibrating noise

LG 42LC2D 42 in. LCD HDTV

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top LG Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...