Why won't our unit stop beeping? - Danby Silhouette DWC512BL Wine Cooler

No indication of 'make model (what it is)', so difficult to give a definitive answer.

Remove power from mains or batteries on the MYSTERY item.

https://www.google.com/search?q=Timer+won%27t+stop+beeping+when+unit+is+off

..

I would look for some sort of door switch that is not engaging. There has to be something that tells the unit if the door is open or closed. This is the simplest and cheapest place to start.

What is the model number?

Link to discussion of beeping at the web page below:


Our Liebherr fridge freezer won stop beeping advice

if it's just continuously beeping, then you may have a shorted control board. This isn't an error code, so if it keeps beeping, you may need to replace the control board itself.

Good Morning Gemma - Try resetting the range by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and turn the unit back on. Is the range still beeping? If so, then the unit may possibly be experiencing a communication problem with the EOC (electronic oven control) or a potential wiring failure. An experienced service technician may need to further evaluate this issue and assist with the repairs.

oil sending unit replace

My unit shut down in the middle of the night and had the blinking STOP on a dark screen, would beep 10 times when plugged in aswell. I set the unit on top of a pan and opened the bottom water drain plug. After draining alot of water out the unit allowed itself to be turned back on again. Guess its either extremely humid or the dual hose setup doesn't evaporate the water as fast as they made out. Anyways, I haven't found anyone else post this so I hope this helps someone out there.

Has anyone had their Cobra radar detector flash low with a deep beep?

Why is my Powerbolt 1000 unit beeping?
To determine why your lock is beeping abnormally, please follow these steps:

1. Take out batteries and unplug powerstrip.
2. Let it sit for 1 minute, then put the batteries back in and wait another minute.
3. If it does not beep, the keypad needs to be replaced (17733-1).
4. If the unit continues to beep, the powerboard needs to be replaced (A17734-3,3 Powerboard 1470 brass finish; A17734-3,26D Powerboard 1470 satin chrome finish; A17734-3,5 Powerboard 1470 antique brass finish).

Contact Customer service from here:
http://www.weiserlock.com/CustomerService/ProductSupport/SupportContact.aspx

Good luck!