20 Most Recent
Questions & Answers
Gap for 2004 silverado 4.8
Model: SILVERADO 1500
Engine: V8 - 4.8L - FI - - GAS
GAP = .040"
I suggets PLATINUM sparkplug (Morotcraft, Bosch, Champion)
Hope helps (remember to rate and comment this).
I have a high pitched
Okay what you want to do today I can host this is to take all of the accessory belts off of the engine start the motor and listen for the sound if you don't hear the sound then you know it's your alternator or one of the other accessories the reason you take off all of the belts is to see if it's a timing belt what you would not be able to take off cuz that's inside the motor the only way to diagnose it is to do this.
My 2004 chevy truck 1500
high pressure or low pressure switch is bad,unplug them and jump them to see which one is bad,on a GM,I have found it was always low pressure switch on the dryer that was bad,hope this helps
2004 Silverado climate control system does'nt function.
If it is as you say, I should check the body harnesses.
When your Silverado was assembled at the factory, the wire harnesses began and ended at the firewall, among many other places.
Each of those locations had a male & a female plug or socket.
If the Silverado ever had a stress in the area of the harness plugs, they could be loose.
Could also get corrosion if there was road salt if you live up north. A car wreck could cause this, or if someone removed and installed the engine.
Lots of reasons.
God bless your efforts.
4 wheel drive lights do not light up
Alot of times it's the electric shift motor on transfer case not working. With vehicle off key on press button and see if you hear it, next see if there is power down there when 4x4 is engaged. You haven't said exactly what your working on so if that's not the problem then you need to fill in some more info.
My gas gauge is acting up. At first it was stuck
You will need to remove the fuel pump from the tank and replace the calibration dial on the side of the bracket for the pump. I am brain dead now as it is 3:00am almost and I am not able to remember what the name of the calibration unit is ,but it will need to be replaced. hope this helps.
Not finding what you are looking for?