Singer quantum xl 1000 sewing machine

First turn off the XL-1000 and remove the auxilliary bed. Attach the embroidery bed and push the lever on the front of the bed to the right. Switch to the embroidery presser foot. Thread the machine with the appropriate embroidery thread and bobbin thread. Set up the embroidery hoop. Turn on the machine. Lift the presser foot to the highest position. Slide the embroidery hoop under the presser foot such that the key on the hoop goes into the slot on the embroidery bed.

The directions for setting up the hoop are given in the manual for the Quantum XL-1000. Singer has most of their manuals here: https://www.singer.com/support .The current link to the manual is https://www.singer.com/sites/default/files/product_manual/1259_xl-100_0.pdf . The section on embroidery starts on page 54 (page 56 of the PDF). Page 57 has the information on securing the hoop to the embroidery frame.

I hope this helps.

Cindy Wells

here are some links about the singer

singer xl 1000


Singer Embroidery and Sewing Machine Quantum XL 1000


Singer Quantum XL 1000 Sewing 6X10 Embroidery Machine

Check the bobbin area and make sure there's not a tangle of thread keeping the hook from turning.

It's in your book under calibrating the touch screen.

Try different card to determine whether the card or reader is issue

try these sites
sewingpartsonline.com
sew4less.com
singerpartsdirect.com

http://www.singerco.com/accessories/manuals.html

Hello,

Try to turn the hand wheel (on the right side of the machine) backwards ( if you are facing the right side of your machine, turn it clockwise) and try to remove the thread. Once its freed up, change the needle.

Hope that helps,
Chris

Go to the internet, type find manual for Singer Quantum XL-1000, you should get a lot of links of which you can download.

Need to have touch screen replaced, parts availalbe thru [email protected] or another authorized service center