Need download phillips gogear 4gb software

Here is the link to Phillips GoGear support. The page has user manuals and software and drives for your product:

http://www.usa.philips.com/c/mp3-media-player/gogear-vibe-4gb-sa1vbe04k_17/prd/en/;jsessionid=2E15B6203880E7668C3095845F8F6DFB.app101-drp3?t=support

Hope this is helpful

Here is a link to download the software you need http://www.usa.philips.com/c/mp3-media-player/gogear-2gb-1.5-inch-full-color-display-sa3020_37/prd/en/;jsessionid=C2895B66C8ABEE0A7ADA32D21F8979BE.app102-drp1?t=support

Universal support for Philips SA60:
http://www.p4c.philips.com/cgi-bin/dcbint/cpproduct_selector.pl?slg=ENG&searchtxt=SA60
Select your model from the page above.

On the page of the model select > Software & drivers on the left side.
Available:

• "Media converter software" for the computer.
• "Firmware" and "firmware updater" for the player

(check the release notes and installation instructions before downloading)

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=GB&slg=ENG&cat=MP3_PLAYERS_CA&sct=SU00304_SU&session=20090816000527_69.204.66.173&grp=PORTABLE_ENTERTAINMENT_GR&ctn=SA1VBE04KF/02&mid=Link_Software&hlt=Link_Software

The Philips site offers the software you need.
If you have the Musicmatch player or windows media player 10
you should be able to download from either player

i need the software

Can i download the Software for my PhilipsGoGear MP3/512MB for free on here? Please!! I lost the CD installation that came with it. Plz, Get back at me!
Email no.1: [email protected]
Email no.2: [email protected]

My old computer crashed with the installation software. I have misplaced the original disk. Is there any way I can download the software so that I may additional music to mp3 playe

This is only a makeshift solution.
I use a philips gogear sa52xx and found out, that deleting the drivers, then reconnecting the Player and pressing F5 in the explorer allows me to normally access the philips gogear sa52xx for about 30 seconds. After that, out of nowhere the drivers will sever and the Code 10 error appears. So, another disconnect - deinstall of the driver - reconnect - F5 in the explorer until the Player appears and then sync. The proplem is, that this works best (maybe only) with mp3 files...
So convert your music files into mp3 first, than do above steps for drag 'n' drop.
Usually, you need to do the whole procedure 2 times for a CD, sometimes 3.

Software can be found by going to:
www.usasupport.philips.com
Enter your model number
On the next page, click on your exact model number without the "B" on the end
On the next page, click on "software and drivers"

Make sure you back up all songs on the GoGear before attempting this solution.

1) Back up all files on the GoGear
2) Open up Philips Device Manager (Start --> All Programs --> Philips)
3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button
4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new

Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard).

-Tha Mp3 Doctor