Lenovo j-3000 stuck in power saver mode
Go the desktop, right click with mouse and select properties (if it XP)
then it will open Display properties --> there you need to go to
Screen saver and then to power option
Disable any power off mode on/ Sleep mode. It will solve your problem.
Please rate the solution. Otherwise let me know for further assistance.
Do you mean yours system not able to boot up at all? Please provide me more info to work upon the issue.
Try to go in BIOS pressing DEL, ESC or any Function keys which are made to go for BIOS by your Defaults Firmware.
Then change the Boot Priority, Power Options and try then. Let me know the status after this.
Dont vote till you get some Helpful & exact solution for your problem.
As from my personal experience, this message only shows when the Monitor is switched ON !
And when you power on the machine (CPU) it will normally bootup. So this will cause no harm to your PC and monitor.
Did you getting the same or it is different than this.
Let me know if you need further assistance.
If your PC not bootup at all then might be the case of RAM or SMPS. You are going in right direction for checking by Unplug the RAM and for Power supply. Let me know if you need further assitance.
×
674 views
Usually answered in minutes!
it will not let go the screen is black
when you turn computer on the screen automatic goes into pwer saver mode and the screen go black with the words running around power saver mode it will not let me do anything
i HAVE TRIED ALL THE F KEY AND ESC WITH ALT i DO NOT GET ANY RESPONSE I'M GOING TO CHECK THE UNIT MAYBE THE MEMORY CARD WENT OUT. I DO NOT HEAR A FAN MOTOR WHEN YOU TURN ON SO COULD HAVE A LOOSE WIRE INSIDE I'M I GOING IN THE RIGHT DIRECTION
Wre still working on it . I'm so glad that you help you did a great job. keep it up
×