20 Most Recent
Questions & Answers
Analog Power Saving Mode
Right click on your desktop>Properties, then click on Screen saver tab, then at botton of the box you should see 'Monitor Power'.
Click on 'Power' then Power schemes tab.
Look at 'Turn off monitor' and set to 'Never'
Hello, today i unluged my
That's probably a message from the monitor because it's not getting a signal from the computer. Look at the VGA cord where it plugs into the computer, or the monitor to see if you bent pins when reinserting the plug.
Analoge safe mode
Go the desktop, right click with mouse and select properties (if it is XP)
then it will open Display properties -->
There you need to go to
Screen saver and then to Power option
Disable any power off mode on/ Sleep mode. It will solve your problem.
Please rate the solution. Otherwise let me know for further assistance.
10/27/2013 12:21:21 PM •
on Oct 27, 2013
How i can open my
In LG w1943sb monitor, screw is not used. .In this type 'press-lock' of cover is used. Did you have opened IR remote control, most remote control also used as this monitor's lock, and you can open with a flat screw driver.
Power saving mode
Go on Option or Menu ,Pwer saving mode then change the setting the way you want them.
My monitor comes on for
This is the technical fault i.e any IC damaged. better take it to the service center or any technician.
Not finding what you are looking for?