Problems to power on...when evently turned on only colourful line appears

Question 1

0helpful

1answer

My 46inch samsung tv has black horizontal lines appear on tv and the colour is affected at the left hand side. what could be the problem?

It sounds that one or two of its back-light CCFL lamp/s has burned out. Check it.

Jan 23, 2013 • Samsung LN-S4692D 46 in. LCD HDTV

0helpful

1answer

How do I program a Micronta programmable timer--I set the time to have it go on, but how do I set it to go off?

LCD Programmable Timer (630-0892) Operation Faxback Doc. # 17153 Setting The Time and Day Follow these steps to set the current time and day. 1. Slide RUN/PROG/TIME SET to TIME SET. 2. Press HOUR to set the hour digits. Pressing and holding down HOUR rapid- ly advances the hour digits. NOTE: P appears to the left of the hour digits to indicate P.M. hours. 3. Press MIN (minute) to set the minutes digits. Pressing and holding down MIN rapidly advances the minute digits. 4. Press DAY until the correct day abbreviation appears. 5. Slide the RUN/PROG/TIME SET switch to RUN. The colon flashes to show the clock is running. NOTE: Keep this switch set to RUN to prevent accidentally changing the time. Setting The Timer The timer has 14 settings (1-14). Odd numbered settings specify a time to turn on the appliance and even numbered settings specify a time to turn off the appliance. Follow these steps to set your timer. 1. Slide the RUN/PROG/TIME SET switch to PROG. The display shows the first setting. If you have not entered any setting, the display appears as shown in the illustration. 2. Press Event to select a setting to enter or change. 3. Press Hour to set the HOUR digits and press MIN to set minute digits to the correct time. NOTE: Be sure P appears to the left of the hour digits when you want to set a P.M. hour. 4. Press Day to select the day of the week for this setting. If you want the setting to apply to every day of the week, repeatedly press DAY until all day indicators appear on the display. 5. When you finish entering the setting, press EVENT. The timer advances to the next setting. 6. Repeat Steps 3 through 5 to enter additional settings. NOTES: Be sure to set the timer to turn off the appliance. The appli- ance remains on as long as there is power if you do not set a time for the appliance to turn off. To replace an existing event, select its setting number and set the new event time. To clear an event, select its setting number and press CLEAR twice. Be sure to clear both the on time and the off time for an event. If you set the timer to turn on the appliance every day, be sure to also set the timer to turn off the appliance every day. 7. Set the RUN/PROG/TIME SET switch to RUN. NOTE: You must set this switch to RUN to turn on or off the appliance either automatically or manually. When the timer automatically turns on the appliance, ON appears on the display and the indicator lights red. When the appliance turns off, the indicator turns off. Reviewing The Settings To review the settings in your timer, set RUN/PROG/TIME SET to PROG. Setting 1 appears on the display. Repeatedly press EVENT to view the other settings. NOTE: To determine event being programmed, pull the power for a period of 5 minutes. Then re-power the unit. The first event will be "ON" and the next will be "OFF", etc. There will be a number to the side of the display that tells you which event you are programming, The even numbers are "OFF" and the odd numbers are "ON" events. (EB 3/17/97) (EB 7/16/97)

Privacy Policy

Sep 10, 2010 • Vacuums

4helpful

1answer

Large colour lines / bands on screen

Thats your midddle driver board on the botton m8.

Try the technique on this video if that doesn't work ,replace the board by with another of the same part number.Cheap to buy.Ebay.LCDTV Spares shops online

http://www.youtube.com/watch?v=9NPobj0_GSo

Jun 05, 2010 • Panasonic TH-42PX60U Television

1helpful

2answers

I have a fluid leak in my 1996 Ford Taurus, v6 duratec engine. The leak appears to be coming from a metal line (and possibly a 2nd metal line located directly below the first). Both these lines are located...

these metal lines aare usually brake lines

Nov 16, 2009 • 1996 Ford Taurus

0helpful

1answer

Hp dv9000 switches on to show coloured lines on screen.

Hello

My first guess is that the screen circuitry has gone bad - although fixable. Use an external monitor to verify this. If the external monitor is fine then the screen circuitry is bad, if the external screen shows the same problem then the video chip or associated circuitry has gone bad. My company fixes these all the time.

Jul 28, 2009 • HP L1702 17" LCD Monitor

4helpful

1answer

29"Colour TV ,Sound Normal ,No Picture a vertical line Appears

Fault in HZ Deflection Stage check yoke also

Mar 01, 2009 • Televison & Video

0helpful

1answer

Sony Trinitron Colour TV Stopped showing and switch light flicker

The vertical output IC has failed/Power to the vertical IC is out/ or there is bad solder on the pins of the vertical output IC.

Dec 01, 2008 • Sony FD Trinitron WEGA KV-34HS420 34" TV

0helpful

1answer

Goodmans LD3755HD Picture Problems

for cms voodoo, change your power module.
for tomchik, check your input voltage for voltage drop or fluctuation, if any employ voltage stabilizer, then change your power module. make sure that there is enough ventilation around your tv.
for bananahead , go and change your backlight inverter

Jan 05, 2008 • Goodmans W280NS Television

0answers

Fluoresecent Display - Harmon Kardon "Festival 60" Micro Stereo

Be the first to answer May 22, 2017 • Kenwood Audio Players & Recorders

0helpful

1answer

Synchronisation with Outlook 2003

I would suggest you to call Microsoft

Sep 11, 2005 • Palm Tungsten T5 - Multilingual Handheld

Question 2

Anonymous

Master 998 Answers
Posted on Aug 25, 2011

Anonymous

Master

Joined: Oct 09, 2010

Answers

998

Questions

0

Helped

189462

Points

2955

The problem of your tv is the bad t-con board or power supply try to check the power supply if there is a bulge up or leaky this is what happens if the t-con board is not receiving enough dc voltage, but be sure to unplug the unit before removing the back cover. If you see this bulge up and leaky capacitor replace this bad capacitor to resolve the problem. Good day and best regards.

Related Topics:

Trustworthy Expert Solutions

Problems to power on...when evently turned on only colourful line appears

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My 46inch samsung tv has black horizontal lines appear on tv and the colour is affected at the left hand side. what could be the problem?

How do I program a Micronta programmable timer--I set the time to have it go on, but how do I set it to go off?

Large colour lines / bands on screen

I have a fluid leak in my 1996 Ford Taurus, v6 duratec engine. The leak appears to be coming from a metal line (and possibly a 2nd metal line located directly below the first). Both these lines are located...

Hp dv9000 switches on to show coloured lines on screen.

29"Colour TV ,Sound Normal ,No Picture a vertical line Appears

Sony Trinitron Colour TV Stopped showing and switch light flicker

Goodmans LD3755HD Picture Problems

Fluoresecent Display - Harmon Kardon "Festival 60" Micro Stereo

Synchronisation with Outlook 2003

Not finding what you are looking for?

Scarlet 42LG6000 42 in. HD-Ready LCD TV

My 46inch samsung tv has black horizontal lines appear on tv and the colour is affected at the left hand side. what could be the problem?

Ask a Question

Check Out the Latest HD Televisions Report

Top LG Televison & Video Experts

Grand Canyon Tech

Cindy Wells

Kolbrun...

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Problems to power on...when evently turned on only colourful line appears

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My 46inch samsung tv has black horizontal lines appear on tv and the colour is affected at the left hand side. what could be the problem?

How do I program a Micronta programmable timer--I set the time to have it go on, but how do I set it to go off?

Large colour lines / bands on screen

I have a fluid leak in my 1996 Ford Taurus, v6 duratec engine. The leak appears to be coming from a metal line (and possibly a 2nd metal line located directly below the first). Both these lines are located...

Hp dv9000 switches on to show coloured lines on screen.

29"Colour TV ,Sound Normal ,No Picture a vertical line Appears

Sony Trinitron Colour TV Stopped showing and switch light flicker

Goodmans LD3755HD Picture Problems

Fluoresecent Display - Harmon Kardon "Festival 60" Micro Stereo

Synchronisation with Outlook 2003

Not finding what you are looking for?

Scarlet 42LG6000 42 in. HD-Ready LCD TV

My 46inch samsung tv has black horizontal lines appear on tv and the colour is affected at the left hand side. what could be the problem?

Related Topics

Ask a Question

Popular Questions

42 inch LG Plasma TV - Lost picture

LG LCD TV Model 42LB5D. The closed caption option is greyed out. Help please.

LG LCD HDTV 'NO SIGNAL'

42 in LG LCD TV turns off by itself

LG flat screen TV speakers make a vibrating noise

Check Out the Latest HD Televisions Report

Top LG Televison & Video Experts

Grand Canyon Tech

Cindy Wells

Kolbrun...

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides