At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Ns dv88 home cinema system has an eject button. This button is touch sensor. Eject button doesnt work. Some times work some times doesnt work.
when push the touch sensor my right hand and My left hand on the system its working. But only push the eject sensor it doesnt work.
Tv model Sony connect via scart socket. No electrical problem in my house.
Hi
first thing first
nice story about a button
couldnt understand what was the point
but at last got it
any way
it appers that your device has a problem of earthing (ground)
try connecting a copper wire to the metal surface of the device to antoher metal surface
and see if the problem dissolves
more then that needs a technician
good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
PDF
Eject Button Touch this button to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is reinserted automatically. Reset Button Press it with a thin, sharp object. The unit will then be reset to factory default settings.
Hi, i'm assuming you have a 40GB phatty PS3. Let's try this: - turn off the ps3 with the main switch, behind the console - press the EJECT touch-key on the front, HOLD on it while you turn on the console with the main switch... keep holding the eject key, if it'll work you'll get your disc out. If it won't work just try a couple of times more then if you don't succeed please advise me with more information about your PS3 model and I'll try to bring you other solutions :) Regards, Peter
turn the console off then place your finger on the eject button and leave it there whilst pressing the power button to turn it on (leave your finger on the eject button the whole time) it should override the error if it is due to faulty hardware and eject the disk if it doesnt you have bigger problems
There is a button (one of the touch sensitives ones up by the power button. You have to press it over and over and over again till it comes out! f that doesnt work then completely turn off the system and before it gets to where you put in yor password (anywhere after you press the power button just nt password place) and then it should pop out!
try un plugging it for a minute ant then plug it back in holding the eject button this should bypass the play button effect and eject your dvd the only other advice i can offer is to never let your sun touch the device again
You willneed to have this unit serviced I'm afraid. You have a laser assy problem, or one of three servo circuits are not working. That would be the focus, tracking or the spindle motor circuits. Good Luck
×