LG Audio Players & Recorders - Recent Questions, Troubleshooting & Support


Hi All, I have LG LHS616W 5.1 home theater which i brought 7 years ago. Home theatre remote is not working and it was missed somewhere in my home while being constructed and remote in not with us currently and forgot image of the remote how it has. Now we are trying to buy the same remote by online and from outside the shops however i have failed to getting this remote because of it seems to be old one which not running currently in market. Please some one help the alternative remote which will work instead of the old one.

LG Audio Players... • Answered on Mar 02, 2021


Your question ............................. is ..................................

LG Audio Players... • Answered on Feb 25, 2021


Possible blown audio stage will cause that.

LG Audio Players... • Answered on Feb 07, 2021


I had the same issue twice (2 diffrent devices) on LG Blue-ray HX-906 - stuck on "please wait" after switching it on. It turned out to be defective mainboard - main BGA chip (the one with black radiator) has some problem with connection to mainboard. Here is how to repair it:- dismount the mainboard- take off the radiator from the main chip- put alluminium foil around the chip to avoid unnecessary heating up of other parts of PCB- heat up the chip using air hotgun to about 200 celsius for about 5 minutes. Mount everything in reverse order and enjoy

LG HX906SB 5.1ch... • Answered on Feb 05, 2021


Nope, but maybe your tv has audio out? Either analog, optical or headphones out. If your surround sound system has hdmi In you may try to put fire stick in sound system and connect that system to tv.

LG Audio Players... • Answered on Jan 07, 2021


You can if your GE URC contains the appropriate code

LG LAP340 Sound... • Answered on Jan 02, 2021


The move may have resulted in surround mode being deselected. The speaker sound check will not detect this.

LG Audio Players... • Answered on Nov 19, 2020


How to hard reset the bar


LG Hlb54s Super... • Answered on Nov 07, 2020


To changethe Region code on your DVD player, open Control Panel - System - Hardware -Device manager, and click on DVD/CD ROM drives, then right click on the DVDdrive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have been made.
NOTE you can make only 4 changes and the player will lock permanently on the4th change.
If you want to play DVD from any region you maybe able to upgrade the firmwareto make it region free BUT if you make a mistake or installed the wrongfirmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece ofsoftware that allows you to play DVDs from any region. There are severalavailable on the Internet but my favourite is DVD-Region Free From:-
www.dvdidle.com/dvd-region-free.htm

LG Audio Players... • Answered on Jun 23, 2020


hahhaa, I recommend you to throw it out. and check out problem here on triveditech https://www.triveditech.com/

LG Audio Players... • Answered on Apr 13, 2020


There are several reasons that this could happen and given the cost of a new one VS the experience you need and the tools and test gear, it would be best to get another one. Could be a sticky power of function key, bad laser, bad motor, bad power unit, bad detector

LG Audio Players... • Answered on Apr 13, 2020


Go to setup-->select Lock--> HIGHLIGHT password (do not select it)-->type on your remote the numbers "210499"--> make sure that now it says None instead of Change

LG LHB335... • Answered on Mar 21, 2020


You need to do some troubleshooting first. Turn the TV on make sure the room is dark take a good flashlight and shine it at the screen and flip through the HDMI inputs. if you don't see an image then it's most likely your main board you can have that fixed or repaired at pts electronics. If you do see an image then the backlights aren't working and you need to check the outputs to the backlights at the main board. The TV is worth fixing

LG 55lw5300... • Answered on Dec 31, 2019


be sure bluetooth is on. also turn both headphones off. once headphones are off, start scanning for bluetooth devices. once scanning, hold the power button down on both earbuds for ten seconds or until theyre both flashing red and blue. your device should then notify you about pairing.

LG Audio Players... • Answered on Dec 27, 2019


Did you check all connections? All audio settings? If yes and it didn't help I think better will be call to specialist in this field. I recently bought new home cinema Ugee 1910B and it works perfect. Quality of video and sound is great.

LG Audio Players... • Answered on Dec 24, 2019

Not finding what you are looking for?
LG Logo

Family Lines

1,851 questions posted

Ask a Question

Usually answered in minutes!

Top LG Audio Players & Recorders Experts

tina gallow

Level 2 Expert

130 Answers

Brad Brown

Level 3 Expert

18666 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you a LG Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...