20 Most Recent NetGear R6300 WiFi Router - Page 3 Questions & Answers


Default access

You didn't supply the Model of NetGear device. Push and hold the reset button for 30 seconds or so, release. This will reset to default settings. Reconfigure the SSID and Security settings. This will help: http://kb.netgear.com/app/answers/detail/a_id/119/~/configuring-your-netgear-router-for-cable-internet-connection
12/29/2018 12:24:56 PM • NetGear... • Answered on Dec 29, 2018

I have a netgear readyNAS NV+ that i want to reset

Whether you bought a used Netgear router or just forgot your own password, you can reset it and start over. This is not an unusual problem, so Netgear has made resetting and restarting their routers a simple task Connect all of your devices. If your Netgear router is not already connected, it should be plugged in, with one Ethernet cable connecting it to your computer and a second Ethernet cable connecting it to your computer's modem. Locate the reset button on the rear of your Netgear router. The reset button is a small inset button and requires a pointed object to reach it. Use a fine-tipped pen to hold the button down for at least 10 seconds. The test light should flash during this process. Open your Internet browser and enter the Netgear router's IP address into the address bar to access the router's information. Generally, Netgear routers use the IP address, but the specific IP address will be listed in the router's manual. Attempt to log in to the router with the default username and password. The default username is "admin" and the default password is "password." If the router's username and password were not cleared away, unplug the router and try holding down the reset button. While you are holding down the reset button, plug the router back in. Log in to the router using the default "admin" username and "password" as the password. You can now reset your information, rename your router and enter your own username and password. http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html
12/29/2018 11:54:05 AM • NetGear... • Answered on Dec 29, 2018

How do i reset my router

To RESET the Netgear, power up the Netgear then press and hold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL - The default login = admin The default PW = password You can now change the default admin password and configure the wireless settings. Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
12/29/2018 11:42:00 AM • NetGear... • Answered on Dec 29, 2018

I need to rest my

Be the first to answer 12/29/2018 11:39:03 AM • NetGear... • Posted on Dec 29, 2018Be the first to answer

How to reset rangemax wireless-n 150 router?

Reset means that you will restore it to factory defaults which will delete all of the configuration settings of the router and will leave you not connecting to internet and wireless as well, but if you really want to reset it, just simply press the black button at the bottom of the N-150 router, press and hold it for at least 15 seconds. Once the lights on the router starts blinking, that means that it is successfully restored to factory defaults.
12/29/2018 11:33:05 AM • NetGear... • Answered on Dec 29, 2018

How to go from 4g to 3g

You don't need to do anything to your Wifi just insert the SIM and try to brows over the data
12/20/2018 2:05:28 PM • NetGear... • Answered on Dec 20, 2018

Netopia 3000 modem default password

11/5/2018 12:27:41 PM • NetGear... • Answered on Nov 05, 2018

Low connectivity internet needs Wi-Fi range extender

As the complexity of the network increases and the area become wide, the speed of the Wi-Fi setup will definitely decrease. When you are having a low connectivity internet connection, you definitely need a Wi-Fi range extender to boost up the signals. Moreover, detecting dead zones and remote areas in Wi-Fi setup become a tedious task. In such cases the devices to convert low connectivity in super-fast speed connection, devices are available. Instead of going for antennas which keep changing their frequencies, it is better to attach the extender for removing the issues related to low connectivity. One other way is to change the base device which is responsible for the Wi-Fi signal. But if the connectivity of the internet connection goes low only sometimes then this is not a very good solution. However, repositioning of the device can be a better solution. Take the device to a place in your network where the signal strength is maximum. You should avoid placing your device in an open area where there are chances that the device might get spoiled. If you have the doubt that the network is shared by your neighbors then change reset the connection and change the password. It is one of the common reasons for getting low speed. At last, to enjoy better internet services, maintain downloading at peak hours and restrict the number of devices under the tolerance power. Netgear WiFi Extender Setup Wizard
on Sep 19, 2018 • Computers & Internet

Ip address

Be the first to answer 9/5/2018 10:17:42 AM • NetGear... • Posted on Sep 05, 2018Be the first to answer

I changed to netgear router now outside cameras will not connect and inside cameras are showing still frames. Not showing actual movements. How do I get a better connection?

Hold down the reset button on the back of the router. This will delete the router name and password and return the router to factory settings. Reboot the router and enter a new name and password. Link the CCTV to the router using the fresh name and password.
8/26/2018 1:48:07 PM • NetGear... • Answered on Aug 26, 2018

How do I contact netgear customer support?

You may try reaching the following number # 1800 419 4543
8/18/2018 8:37:29 AM • NetGear... • Answered on Aug 18, 2018

I need to change the password for my router

8/10/2018 11:29:12 AM • NetGear... • Answered on Aug 10, 2018

Netgear extender not getting connected to Xboz after power outage. what to do

Have you tried restarting the extender and router? Also unplug the xbox and plug it back in
8/6/2018 6:43:28 AM • NetGear... • Answered on Aug 06, 2018

Netgear extender not connecting

There's quite a bit to know about using WIFI network extenders / repeaters. Have a look here; Simple Wireless WIFI range extender expander repeater
6/21/2018 4:49:01 PM • NetGear... • Answered on Jun 21, 2018

Netgear 3ks35a7la2541 is not conected to internet

Hi Luis. go to this link and have a read up on what might be the problem. https://kb.netgear.com/1110/Troubleshooting-wireless-networks
5/16/2018 9:11:24 PM • NetGear... • Answered on May 16, 2018

What is The Method of Change Netgear Wireless Router's Admin Password

If you can't remember the password ! You will need to do a factory reset to reset the router to factory settings. however all settings will be lost and have to be set up again. Google your model number and factory reset If you need to change it you need to tell us the model number so we can figure out the exact instructions.
5/15/2018 11:32:28 PM • NetGear... • Answered on May 15, 2018

Activate my netgear

You probably need to call your internet provider so they can allow it.
2/4/2018 7:25:49 PM • NetGear... • Answered on Feb 04, 2018

Can not connect to my wifi router with Windows 8.

If your other devices will connect to the router fine, then the problem is not with the router. check your PC to see if the WIFI card is working or is turned off.
1/13/2018 8:05:29 AM • NetGear... • Answered on Jan 13, 2018
Not finding what you are looking for?
NetGear R6300 WiFi Router Logo

Popular Tags

19 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts


Level 3 Expert

4383 Answers

Donivan Wise

Level 2 Expert

254 Answers


Level 3 Expert

1088 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

unlock wifi

  • Computers & Internet