20 Most Recent
NetGear R6300 WiFi Router - Page 6 Questions & Answers
Netgear ngnd3700v2
https://www.netgear.com/support/product/DGND3700v2.aspx?cid=wmt_netgear_organic
9/10/2016 10:01:38 AM •
NetGear...
•
Answered
on Sep 10, 2016
Why did the router ID change when I linked it via the Wps button to the DSTV wifi gadget ?
Here's and excerpt from the Netgear WNR2000 user manual explaining that this is normal behavior for Netgear routers that support WPS..:
- Keep Existing Wireless Settings. This check box is automatically selected after WPS is enabled to prevent unwanted settings changes, and is also selected if you have already specified wireless security settings or your SSID without using WPS. When this check box is not selected, adding a new wireless client using the push button or the Add WPS Client screen (see "Push Button Configuration" on page 2-14) changes the router's SSID and security passphrase. You might need to clear it if you are using certain registrars, such as for a Windows Vista PC, to configure the router through WPS.
Even if your router is not a WNR2000, it is likely that the configuration interface pretty much the same so you might be helped by looking at
Chapter 2 page 17 in the WNR2000 manual here..:
Or else, go to Netgear support (
NETGEAR Support Welcome), select Wi-Fi routers and download/display the user manual pdf and search it for "disable router's pin" or "keep existing wireless settings" and verify/change the setting so the router doesn't make changes when you use the WPS button.
6/10/2016 2:24:11 AM •
NetGear...
•
Answered
on Jun 10, 2016
Model 300. Where is wsp pin?
I would go to Netgear's website and follow the instructions.
The pin is normally on the label with the serial number.
5/2/2016 6:46:10 PM •
NetGear...
•
Answered
on May 02, 2016
How to set up router?
What kind of router?Sorry I do not know how to set that kind up I can give you a video on how to set up a router that might give you an idea on how do you want me to do that?Connect the router's WAN port to your Internetsource, such as a DSL or cable modem, using the first network cable. ... 2 Connect one of the router's LAN ports (most routers have four LAN ports) to the computer using the second network cable.Try this https://www.youtube.com/watch?v=_mQvPzJOQEI it is on you tube it might help
4/8/2016 2:01:37 PM •
NetGear...
•
Answered
on Apr 08, 2016
Hello I am trying to to install my new 7550 Netgear router but I cannot access this ip addresses 192.168.254.254. Please help I cannot access this pos lol
Thanks Miles
this may be a bit technical ,but stay with me , the address your trying to access is in a different subnet (security reason) the machine your using to access this router has to be in a Ip range of 192.168.254.0
to 192.168.254.253r it will not be able to "see" the device this address is typically used for router config as its not a common used number and so it's unlikely to have any conflicts, however after you config the router , both it and the machines on its network should be set to something in the range of 192.168.1.01 to 192.168.2.254 as this is a more typical range of numbers to use on a small network and should help to eliminate any future config problems as new devices are added in the future
2/27/2016 12:15:18 AM •
NetGear...
•
Answered
on Feb 27, 2016
Does the net gear 98 work with chrome cast
If this is a wireless router, your chrome cast device should pick up the signal if within reach. Make sure there is power to the chrome cast. Be sure the router is emitting Wi-Fi signal (test with a tablet or smart phone to make sure). Power cycle both devices (turn off-unplug-wait five minutes-reconnect and switch on) then attempt connection once again.
2/10/2016 6:09:50 AM •
NetGear...
•
Answered
on Feb 10, 2016
Want to change my password
NETGEAR home> router IP address should be assigned as either 192.168.1.1 or 192.168.0.1.
- Username (all models) = admin
- Password (current models) = password
- Password (very old models) = 1234
1/17/2016 6:55:56 AM •
NetGear...
•
Answered
on Jan 17, 2016
How do I find the password
NETGEAR home
router IP
address should be assigned as either 192.168.1.1 or 192.168.0.1.
- Username (all models) = admin
- Password (current models) = password
- Password (very old models) = 1234
1/17/2016 5:24:28 AM •
NetGear...
•
Answered
on Jan 17, 2016
Not finding what you are looking for?
