Top 20 Logitech MX Revolution Wireless Laser Mouse Questions & Answers

In Control Panel there is option to use your keyboard numeric keypad to move your mouse cursor. Also you can use tab key from keyboard to select options and then press space or enter to select Thanks

Hi have you read the manual perhaps , This could be a indication the battery is low , or it has lost signal.
Good luck

Hello. Yes, it is quite simple to remove the battery of a Logitech MX Revolution mouse yet for some reason when going through the Logitech product support website it states that it is not possible. Just remove the 4 teflon pads located on the bottom of the mouse and then remove the four screws located under the pads. Once this is done turn the mouse back upright and remove the top off of the mouse. I would suggest temporarily removing the flex cable that holds the top and bottom of the mouse together. There is a small metal clip that holds the battery in place that must now be removed. NOW FOR THE VERY IMPORTANT PART. There are two different generations of the Logitech MX Revolution mouse which have different batteries. The first Generation uses the L-LY11 battery and the newer generation of the MX Revolution uses the L-LL11 battery. There is no way to tell which battery your mouse uses without first opening up the mouse. Once opened you can easily tell which battery your mouse uses. Here is a link to a site that shows you an example of the L-LY11 battery: MX Revolution L-LY11 BatteryHere is a link to a site that shows you an example of the L-LL11 battery: L-LL11 Battery for Logitech MX Revolution MouseAs you can see the L-LY11 battery has wires and a plastic connector and the L-LL11 battery has contacts. You should definitely determine which battery your mouse uses ahead of time to eliminate any frustration caused by ordering the wrong battery ahead of time.

Problem was solved by remove usb connection and reconnecting. All buttons work now. Thanks

• Check the orientation of the batteries inside the keyboard and mouse, or replace the batteries. • Is the USB receiver securely plugged into a computer USB port? Try moving the USB receiver to a USB port closer to the keyboard and mouse. • If the USB receiver is plugged into a USB hub, try plugging it directly into your computer. • Remove any metal object between the receiver and the keyboard/mouse that may interfere with reception. Try using the mouse on a different surface. • Restart the computer. • If these suggestions don't work, download the Reconnection Utility from http://www.logitech.com/connect_utility.

Of course not. It is a simple I/O (input output) device. It stores no data. ..

Unfortunately, EN 60950 is not a Logitech model number. It indicates that the mouse (or other electronic product) was tested and met the European IEC 60950 standard. Here's a copy of a Logitech EN60950 certificate: https://www.logitech.com/images/pdf/compliance/AGY-700-018651.001_AGY%20CERT%20CB%20HS%20A00086%20BAER%20CI%20(GGEC)_EUROPE.pdf . Logitech sells several different wireless mice types. Some connect to Bluetooth only. Some connect with a specific USB wireless transmitter/receiver. The dongle is small enough to fit inside the mouse's battery compartment or stay in a USB port when the laptop is moved. (Older Logitech devices used the Unifying USB wi-fi adapter; new ones use the Bolt adapter.) A few models can be used with both Bluetooth and one of the wireless adapters. These can connect to two or more devices and then a single button switches between devices. Please try to find the actual model of the mouse to get the correct information for connecting the mouse. Logitech support may be able to sell you the USB dongle if they have the correct one in stock. I hope this helps. Cindy Wells

When charged, the green light does not flash. However, since you mentioned that the old battery is also not flashing any light, it could indicate that there might be some issues with the charging base or the keyboard itself. Here is a link to some troubleshooting steps to take. But if they do not work, your next step is to contact Logitech support. Troubleshoot keyboard connection issues - Logitech Support + Download

The PCBs will be the same, the language and therefore what the keys type comes from the computer software that is chosen. The hardware keyboard is the same, just different printing on the keys.

Return it to the maker for repair or find a local audio tech. https://www.google.com/search?q=LOGITECH+SQUEEZEBOX ..

I have ruined 3 keyboards taking them apart trying to clean them. Just replace the keyboard, they are a disposable item and don't last forever. If you can find a Cherry Brand keyboard, they are the best quality. Mine is over 20 years old.

have you installed usb receiver? I have installed several keyboard and mouses, they all connected aytomaticaly copy and paste https://www.logitech.com/assets/50388/wireless-combo-mk330-quickstart-guide.pdf ..

Unfortunately, Logitech does not offer any Bluetooth support for the Logitech Y-RAJ56A keyboard. The keyboard is designed to be used with a wired connection, and it does not have any Bluetooth capabilities. Yes, you can use a Bluetooth adapter to connect your Logitech Y-RAJ56A keyboard to a Bluetooth enabled device. However, you should bear in mind that the keyboard will not have any additional features or support when connected via Bluetooth. So you will need to purchase a Bluetooth adapter. The Kinivo BTD-400 Bluetooth 4.0 USB Adapter is a good choice and is compatible with most versions of Windows and Mac. P.S. BTD400 Advisory A recent update to Windows is preventing the BTD-400 from locating drivers automatically when plugged in for the first time. Please visit the article below to set up the BTD-400 Bluetooth Adapter for the first time. BTD400 Driver Installation

it you forget something that must install on your PC to operate your Mouse G502. Just get logitech g502 software first, then install it to your PC

Send it back to Logitech for repair under warranty. https://www.logitech.com/assets/49301/3/ultrathin-keyboard-cover-i5-quick-start-guide.pdf ..

All the information is here https://support.logi.com/hc/en-us/articles/360024847013--Downloads-X52-Space-Flight-H-O-T-A-S- Manual https://www.logitech.com/assets/65328/2/x52-hotas.pdf ..

It sounds like you are trying to use the same formatting settings on your new Logitech keyboard that you had on your old Logitech keyboard, but the formatting button is not present on the new keyboard. To add the formatting button to your new Logitech keyboard, you will need to do the following:

1. Open the Logitech Options software. This software allows you to customize the settings and functionality of your Logitech keyboard.
2. Select the "Buttons" tab. This will allow you to customize the buttons on your keyboard.
3. Find the formatting button that you want to add. Depending on the model of your keyboard, you may have the option to add a variety of formatting buttons, such as bold, italic, and underline.
4. Assign a function to the button. To add the formatting button to your keyboard, you will need to assign a function to it. Click on the button and then select the formatting function that you want to use.
5. Save the changes. Once you have added the formatting button and assigned a function to it, click the "Apply" button to save the changes.

I hope this helps! Let me know if you have any other questions.

google Logitech M-R0013 receiver for more info they start at $5.00

yes.

It should be on the box it came in, as a barcode and text. or you can sometimes download the computer software and it will identify it in Properties https://support.logi.com/hc/en-us/articles/360024361233 Or you can ask them direct https://support.logi.com/hc/en-us/requests/new?ticket_form_id=360000621393 Here is you manual, just because I came across it. https://www.logitech.com/assets/38467/3/hd-webcam-c615-gsw.pdf ..