Top 20
Dell 926 All-In-One InkJet Printer Questions & Answers
Printing only left side of a page, right side totally blank
What application are you using to print text? Word? Try a simple application, like Notepad or Wordpad, to print some simple two-liner text. Does printer print ALL the text on left side or just the half of printable material? Even if you are indicating that page size is correct, looks to me some problem with the selection of print area.
10/3/2015 12:49:26 PM •
Dell 926...
•
110 views • 0 helpful votes
How do I clean rollers on my dell printer
Anonymous,
How to Clean Your Printer's Rollers
- Turn Off Your Printer - Use the power button to turn off your printer. After it has successfully powered off, unplug it. You don't want any power coming into the machine while you are cleaning it.
- Let it Cool Down - Even if you haven't printed anything recently, you should still let your printer cool down for a few minutes. While it's on standby, it can build up a decent amount of heat. The last thing you need is to burn yourself while trying to clean its rollers.
- Remove the Paper Tray - In most cases, you will need to remove the paper tray in order to gain access to the printer rollers. This is usually as simple as pulling it right out. You will have to remove any paper that is in it first. If you're unsure about how to remove the tray, refer to your owner's manual. Don't force the tray out of your machine. You could inadvertently damage it by doing so.
- Remove the Ink Cartridges - This step isn't always necessary. If the ink cartridges stand between you and the rollers though, you will have to remove them. Simply remove them as if you are going to exchange them for new ones.
- Have Your Supplies Ready - You probably already have what you need to clean the printer rollers. A lint-free cloth is a must, and water will generally suffice. If you'd prefer, you may also use isopropyl alcohol. However, you should wipe the components down with water after cleaning them with the alcohol. If you don't, an oily reside could be left behind, and it could have a very negative impact on print quality.
- Clean the Rollers - Now it's time to get down to business. Lightly dampen your lint-free cloth with water or alcohol. Squeeze it out to ensure that it's not too wet. Hold the cloth in one hand and press it lightly against the first roller. With your other hand, gently rotate the roller until you have cleaned it all the way around. Be extremely careful. Do not use too much pressure. You might have to run it through a few times to remove all of the residue.
- Repeat for Each Roller - Simply repeat the same process for each printer roller.
- Get Ready to Print - Once you're satisfied that the rollers are clean and dry, replace the ink cartridges. Replace the paper tray and load it with paper. Plug the machine back in and power it up again.
Thank You,
Dell-Jesse L
Dell Social Media and Communities
#iwork4dell
9/10/2014 11:28:45 PM •
Dell 926...
•
325 views • 0 helpful votes
How do I trouble shoot problems with color prinouts?
Inside printer when open righthand side You'll see a pad and set of brushes clean with clean rag, and run clean in printer options. Then run align cartridges. should solve problem. make sure when putting in ink you just snap in and not mess with after that.
7/8/2014 8:57:14 PM •
Dell 926...
•
72 views • 0 helpful votes
How to prind 2 sided on dell 926 printer
Let me try again:
You may already have the answer, but just in case:
I'm guessing it's new printer to you and that you've never had a double-sided printer. If that's the case, I can't speak to your particular printer, but it should be in basically the same area.
- Select the printer. Somewhere -- probably to the right, you should see a "Properties" button.
- Click on the Properties button. Under one of the tabs you should see an option for "duplex" or, perhaps, "2-sided" printing. My printers have "two sided" but our networked copier at work has "duplex".
- Simply select that option. ALSO, it will ask you along which edge you want to flip. It's simple with my Brother (home) and HP (work), but the flip-along-x-edge is unclear on the network copier/printer I have to use... so you might have to try it to see which one is the one you want.
(for my personal printers, it's "flip along long edge" or "flip on short edge"... can't remember what it is with the network.
Hope this helps you... or someone else, perhaps!
3/31/2014 9:34:12 PM •
Dell 926...
•
59 views • 0 helpful votes
CannonMP 460 ribbon jAMMED
Under Dell 926 you have asked a question about Cannon MP 460. So Beryl which one is it? Also how old because days of ribbon have gone long time ago.
8/23/2013 3:43:36 AM •
Dell 926...
•
37 views • 0 helpful votes
How do u load paper into
Place the paper onto the "In" tray of the printer and push the printer guides against the paper to secure the paper in place. Fold the "Out" tray down.
2/14/2013 12:58:38 AM •
Dell 926...
•
30 views • 0 helpful votes
Lost my power connector for dell all in one printer 926
Check out Dell-Amazon-Newegg-TigerDirect-or E-Bay,to see if you can get one on one of these sites.A used one or a refurb will be a little cheaper than buying brand new. Or you may find one at a local computer store in your area. Good luck and I hope that this helps you out...
1/10/2013 4:12:16 AM •
Dell 926...
•
35 views • 0 helpful votes
How do i put in ink on 926 dell photo scanner and copier
From the online manual...1. Turn on your printer.2.Lift the printer unit, and then position the scanner support between the tabs to hold it open.3.The ink cartridge carrier moves and stops at the loading position unless the printer is busy.4.Press down on the ink cartridge lever to raise each ink cartridge lid.5.Remove the old ink cartridges.6.Store the cartridges in an air-tight container, such as the storage unit you received with your photo cartridge, or dispose of them properly.7. If you are installing new ink cartridges, remove the sticker and transparent tape from the back and bottom of each ink cartridge.8. Insert the new ink cartridges. Make sure the black or photo ink cartridge is secure in the left ink cartridge carrier, and the color ink cartridge is secure in the right ink cartridge carrier.9. Snap each lid closed.10. Hold the printer unit up, push the scanner support back to unlock it, and then lower the printer unit until it is completely closed.Manual can be downloaded
here.
10/30/2012 2:25:59 AM •
Dell 926...
•
72 views • 0 helpful votes
Error 1203
It means your cartridges overflow even from brand new cartridges after a
several prints or right after you refilled the cartridges. Check to see
if ink are smeared on the holder where the contact panel with the
cartridge.Solution:
use the lint free cloth(coffee filter work great) with a few drops of
water to dampen and clean off contact on the holder and i think printer
will work again.
Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times.
Print the test page to see how it's look ...
If you need any technical help on printer then you can reach at
http://www.vtechsquad.com/
11/21/2012 3:23:41 AM •
Dell 926...
•
27 views • 0 helpful votes
Not finding what you are looking for?