20 Most Recent JVC GR-DVL820U Mini DV Digital Camcorder Questions & Answers

This is usually caused by an oxidized, misaligned or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Look in the view finder when recording instead of the screen. if you see the image there then the unit is probably set to look through there. Many of the new units dont' have a full view finder to lens item they actually have a small lcd screen inside the view finder. Check your options for recording.

Also if the view finder is tilted you need to close that before usign the lcd.

The image will not appear simultaneously on the LCD

monitor and the viewfinder. It will appear in the

viewfinder when the LCD monitor is in the lock position,

and it will appear on the LCD monitor when fully
extended.

Drum doesn't spin. Check drum motor or related circuit

best try http://uk.jvc-service.net/public/

I hope you have received software CD and Drivers when you buy your camcorder. you will be able to use Windows Movie maker come with windows XP if you have installed drivers.

Have you looked in the manual ?

Not sure , do you mean safe mode ?

Take camera and its battery to a camera outlet, ask them to check the built-in rechargeable battery. Most outlets will help you with this, as its likely that if the battery has failed, you'll buy a replacement from the same dealer.

not sure on this one but it might be the heads in your vid cam may need cleaning. or the tapes are not running straight on the heads or the rollers in side. if the vid cam has been in a cold place it can cause this fault as the heads may have a bit of damp. try putting a tape in and run it fast forword in play mode and see if starts to clear the playhead.if it does keep doing it until you see a clear picture. this could also be a head misalignment fault if it is you will have to take it to some one to have a look at. if any of the above does not work then you will have to take to some one to look at it. .

Sounds as if the battery needs replacing - have you tried with a spare battery ?

The heads need cleaning. DO NOT USE A HEAD CLEANING TAPE. Thats like holding sand paper to the drum. Use alcohol and a swab.

Do you have the sd card that holds the pictures? Put in computer. Computer will give you option how to open and save photos. You do not have to use makers software disc, any photo reader can store your pictures on computer.

How much would one be worth today