2wire (1000-400108-001) Router - Page 5 - Answered Questions & Fixed issues

Try the user guide --->link.

Hi
Please loginto the router management console
Then go into the interface mode
You can set the MTU as per your requirement inside the interface settings

By default the MTU is being set as 1500bytes on Ethernet type interfaces

go to 2Wire.com: Home

Go to LINK.

Unplug the power cord for the router for 30 seconds and then plug it back in.

your key code is listed on the under side of the modem.

move it closer to the router or visa verser also you can get a wifi areial which may help.

Here is a Forum from xbox live hope this helps
http://xbox360help.blogspot.com/2007/03/mtu-failed-on-xbox-live-test.html

easiest way if you don't know it is to just reset it. With the router powered on hold down the reset button on the back for 10 seconds. This will return the router to it's factory settings. You can then connect without a password and then set the security and network key to your liking.

Run your DVRs outomated network setup.. If this fails, you will have to get the ip settings manually. to find them, use a computer that is connected to the router.. Do start, run, type cmd, press enter. In the black window that comes up type ipconfig /all this will give you the settings the DVR wants. choose manual setup from your DVRs network connection menu.

1. you will have to access the routers permissions page.
You should be able to access the admin page through a browser page using 192.168.1.1 or 192.168.0.1 . Check your user manual for the correct IP address to access the Admin page.
2. You will need to allow the I POD to access the internet via your router with either the MAC ( Media Access Control ) address or be an IP assigned by the router.
3. You will need to set up your (DHCP) Dynamic Host Control Protocol ) and your DNS (Domain Name Service / Server) automatically.

I'm not sure why your hawking is not compatible, it probably shuold be as long as it's on the same band and supports the same security settings (key/algorithm/etc.)

I'd start off with your hawking by changing it to open with no security, then try to setup your hawking. If that doesn't work then you may be right about it not being compatible. If it doesn,then add some remedial security like shared/wep40bit, then try to move up to a wpa2personal level of security.

You can download drivers here (Win)
or here (Mac)
Instructions is here. (Win) (Mac)

You can find guide here.
If you get CD with your router, insert it in your computer and run setup on it. First connect Router to PC trough USB cable, which you get in package. If you dont have one, you can try connect with ethernet cable.

The most possible reason is the distance between the router and the laptop. Try to reduce this distance to check it out.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

I would recommend doing a 30/30/30 reset. Press and hold the reset button while it's plugged in for 30 seconds, then unplug it, continue holding the reset button for 30 seconds, then plug it in, continue holding the reset button for 30 seconds. Then I would power cycle it once more: unplug it, wait 30 seconds, then plug it in. If there is no reset button, I would contact the manufacturer on how to change the language setting.

Hi,
1)Are you able to ping your gateway?
2) Are you able to ping public dns 4.2.2.2?

if above both is working fine then check the dns..

Ok I need a little more information here, but can definitely help you. Do you currently have any computers hooked up to this router, and are any of them working? Do you have the model number of the router? It should be located on the actual router unit somewhere, either on a sticker on the bottom, or somewhere similar.

Please let me know this information and I can definitely help you fix this!

Thanks,
Tim

radio shack sells universal power adapters of all sorts or you can try ebay ebay is the cheapest route

This may be a filter problem on the phone line.
Have you got a plug in filter on the main phone socket?Usually they provide 2 filters with routers.
when you pick up the phone can you hear crackling if you can it's the filter.Bad connections on plugs.cable short or open.