20 Most Recent 2wire Wireless-G 802.11g ADSL Gateway Questions & Answers


Stop wasting time with video games. there are more important things to do with your time. When the gaming thing stops being fun, it time to stop and do something else.

2wire Wireless-G... | Answered on Jan 06, 2018


I would boost the signal it can only help I had the same sort of problems but my wireless router quit working properly my iPad wouldn't pick up signal so I had to replace my wireless router hope this helps Merry Christmas

2wire Wireless-G... | Answered on Dec 09, 2017


login to your 2wire router using a computer that is connected , open a browser and type 192.168.1.254 on the address bar, once logged in look for wireless setting you'll find WPS setting /button click on that then push the WPS on your bluray player this needs to be done within a few seconds for the router and the bluray player to pair.

2wire Wireless-G... | Answered on Jun 25, 2016


Telephone CENTERLINK, and ask for "technical support".
They can help you configure your E-mail to their specifications.

2wire Wireless-G... | Answered on May 11, 2015


The ID/password that you should use are printed on the bottom of the router -- using your E-mail ID/password will not work.

2wire Wireless-G... | Answered on May 07, 2015


If you are looking for the Password to an ATT 2 Wire ADSL Gateway it is located on the router. Here is an Image of where it should be located and the password is the second set of numbers between the 2 barcodes.
login-2wire-router-key.png
To get into your ATT 2wire from the computer follow these steps and you can set up your own information manually.
  1. Type this address into your web browser. http://gateway.2wire.net/
  2. You will go to the the main administrator gateway page.
  3. Then click on change system password.
  4. Change it too a password of your likeing.
  5. Save your new password.
  6. You are done.

2wire Wireless-G... | Answered on Jan 29, 2015


The parental controls are software pushes that the internet provider gives you. You have to call them to see if they are available or not.

2wire Wireless-G... | Answered on Nov 25, 2014


Click start type cmd press enter you will be in DOS mode
type in ipconfigpress enter you will see all of your internet connection details type in your default gateway ip adress into your internet search should read something like 10.0.0.138


Your IP Address should be thought more as your computer's phone number than it's address, if you have multiple connections, you have multiple IPs if you dont have a connection, you dont have an IP.

Without further delay If you need your computers IP address:
This will work in almost every case, it simply requests the website's server to tell you what your IP is. http://whatismyipaddress.com/
I have included a link to make things easier.

If you are in a network and need your computers local address.
Hold the windows button (looks like the windows banner, usually between left ctrl and left alt) and press 'R'.

A box will display, and type in "cmd.exe" and hit enter.
The 'command prompt' will display, a black screen with white lettering.
Simply type in ipconfig. This gives information on all your internet connections.

Look for the line "IPv4 Address".
If you need to find the IP of a current connection you can type (from the command prompt) "netstat".

This will give you all your current connections.
To identify a specific one, the easiest way is to run it before you establish the connection then again afterwards.
Change IP Addresses

Your IP address is a series of numbers that identify your specific computer on the Internet.
If, for some reason, you want to change your IP address, you can do so without going into the command prompt.Click "Start," "Control Panel," "Network and Internet" and "Network and Sharing Center."

Click "Change adapter settings."
Right-click the network you want to change and click "Properties."

Click the "Networking" tab.

Put a check either next to Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) and click "Properties."

Click the radio button next to Obtain an IP Address Automatically if you want Windows to assign one, or click "Use the following IP address" to manually change it.

Enter the requested information and click "OK."

2wire Wireless-G... | Answered on Apr 14, 2014


check the channel setting in ADSL router.

2wire Wireless-G... | Answered on Aug 27, 2013


i have att u verse cable box that has parentel locks on can you reset it?

2wire Wireless-G... | Answered on Jan 24, 2013

Not finding what you are looking for?
2wire Wireless-G 802.11g ADSL Gateway Logo

Popular Tags

203 questions posted

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Ron Stone

Level 2 Expert

398 Answers

Mike

Level 3 Expert

4369 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

2wire Computers & Internet

  • 2wire Computers & Internet

Most Popular Question

im trying get internet psp go

  • Computers & Internet
Loading...