20 Most Recent eMachines EL1352G-01w (884483537679) PC Desktop - Page 3 Questions & Answers

you must check your browser which cud be outdated....download the latest chrome or mozilla browser and you are good to go

You have to be the computers administrator to change any values on any hard drive on your computer

click start control panel user accounts on the users tab click the name of the computer administrator you must have full control

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select openRight click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a replyhop this helps

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer you could select the option start at last known configuration that worked this will tell you if and what file has been corrupted or missing then you will know if its a hardware issue and work your way through the problem if the problem still persists f8 back into safe mode you might need to select your operating system to load into safe mode you might use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work Manual restore points that you specify with the System Configuration utility Installation restore points that occur before you install a program or a service you can use the system checkpoints or the installation restore points to restore your computer's settings to a date when it operated correctly. This may also help determine the cause of the configuration error.To perform a system restore, follow these steps:

1.Click Start, click Run, type msconfig, and then click OK.

2.On the General tab, click Launch System Restore.

3.Select Restore my computer to an earlier time, and then click Next.

4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information.

5.Select a system checkpoint or an installation restore point, and then click Next.

6.Close all other programs.

7.To start the system restore, click Next.

8.Your computer restarts.

Repeat steps 1 through 8 until you fix your configuration issue.

hope this helps

I don't knowi what kind of Help you need but still below is the link which may help you .DISKPART COMMAND

just pull the the two plastic lock outwards.

ubuntu is down grading your graphics to suit your screen if you reset your cmos then try booting into safe mode you should be able to play with your graphics settings

download ccleaner from piriform.com and install and run the cleaner, you can also download and run defraggler from the same website and run it, click analyze and make sure it requires defragging, if it does go ahead and do that too. If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

http://download.cnet.com/belkin-54g-wireless-usb/3000-2112_4-83639.htmlhttp://download.cnet.com/belkin-wireless-g-usb/3000-2112_4-191193.html http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for

IE: motherboard name audio driver you might have to try a few times to get it right

hope this helps

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options MenuPlease select an option:

Safe ModeSafe Mode with NetworkingSafe Mode with Command Prompt

Enable Boot LoggingEnable VGA modeLast Known Good Configuration (your most recent settings that worked)Directory Services Restore Mode (Windows domain controllers only)Debugging Mode

Start Windows NormallyRebootReturn to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice.

select safe mode with command prompt then type in chkdsk/f/r which will scan for and and attempt repair of bad files and bad sectors on hard drive

you should have no input while chkdsk utility is in progress any input might further damage your computer or

Use the System File Checker tool (SFC.exe) to determine which file is causing the issue and then replace the file.

Type the following command and then press ENTER: sfc /scannow The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.

you might be able to remove password in safe mode aswellhope this helps

If you made backup recovery cd's do a fresh install of the operational system to factory setting.

No light on the CRT? Are you saying the Power button does not turn the CRT on? If so, you need a new CRT.Or are you saying when you turn the computer on there is nothing displaying on the CRT? If so the problem could be with your video card on the computer, or the CRT is bad.Check the Cables between the CRT and the Computer and make sure it is connected good.

Computer does not boot upThe problem maybe the RAM, it is faulty or just needsreseating to make proper electrical contact.Reseat the RAM and then boot up your laptop. If it still does not boot up thenremove the RAM module/s and take them to your friendly computer repair shop andget them to test the RAM for you.

Hi,Try scanning your system with an updated anti-virus.If problem persists,repair your Operating system.Hope it helps.Thanks.

Is it a brand computer (Dell, HP) or a custom build? and what year did you get it?

is the monitor hooked up correctly to the tower?is it possible the monitor has gone out?or the video card gone out?

Thirteen quick beeps at startup on an eMachines E520 usually indicate a problem with the laptop's RAM (Random Access Memory). This could mean that the RAM is not properly seated in its slot, or it could be a sign of a faulty RAM module.

Here are some troubleshooting steps you can try to resolve this issue:

Turn off the laptop and disconnect it from the power source.
Remove the battery from the laptop.
Locate the RAM compartment on the bottom of the laptop.
Check to make sure that the RAM module is seated properly in its slot. You may need to remove and reinsert the RAM module to ensure a proper connection.
Replace the battery and turn on the laptop.
If the problem persists, try removing the RAM module and testing it in a different laptop or using a different RAM module in the eMachines E520 to determine if the problem is with the RAM module itself or with the laptop's RAM slot.
If none of these steps solve the problem, it may be necessary to contact a computer technician for further assistance..

1. Boot the computer to the boot menu: To do this, restart the computer and press the appropriate key when prompted to enter the boot menu. On most eMachines computers, this is the "F12" key.
2. Select the CD/DVD drive as the boot device: Use the arrow keys to select the CD/DVD drive and press the "Enter" key to boot from it.
3. Insert the Windows ME boot disk: Insert the boot disk into the CD/DVD drive and restart the computer.
4. Choose the "Start Computer with CD-ROM support" option: When prompted, choose the "Start Computer with CD-ROM support" option.
5. Run the Windows ME setup program: The setup program should start automatically. Follow the on-screen instructions to install Windows ME.
6. Format the hard drive: During the setup process, you will be prompted to format the hard drive. Choose the "Full" format option to erase all existing data and perform a complete factory reset.
7. Install Windows ME: Continue to follow the on-screen instructions to complete the installation of Windows ME.

After the installation is complete, the computer should be in a factory reset state and you can begin setting it up as a new system. Please note that resetting your computer to the factory settings will erase all personal data and installed programs, so be sure to back up any important data before proceeding with the reset.

Larry picks up a question from 2015 ;>) Larry Ng Feb 07, 2022 no PC model told hopeless If desktop, the jumper on the MOBO marked PW_CLR on most. Never laptops