Emachine will not boot up - EL eMachines Computers & Internet

Kindly perform the below steps:
- Remove the battery and Power adapter
- Press and hold the power button for 30-45 seconds (with battery and power still removed)
- Insert just the battery and attempt to boot the laptop.

After the laptop booted go to the eMachine/Gateway Support site and download the webcam driver and software.

http://www.driverscape.com/manufacturers/emachines/laptops-desktops/emachines-e727/3265

I believe you might want to set the boot to

1 DVD (first)

2 SATA Drive (second) Maybe you didn't have this listed as 2nd.

If you have a disk in the DVD drive it will say press any key to boot from the DVD drive.

Here's a video on how I fixed my emachines boot problem. Almost anything can get in the way of your computer booting. Software, hard drive, RAM, motherboard, processor, etc. Below the video, I attached a link to a tip I made about computer crashes. Computer Crashes and Electrolytic Capacitors

error repair tool at emachine

http://www.wiki-errors.com/download.php

be sure nothing on you keyboard or pressing any key

Found an emachines procedure here:

http://www.emachines.com/faq/vista/7515418su539.html

Hope this helps.

most likeley if you see something on the screen but it wont boot it is a mem problem, does it load bios, if so it is prob not memory

what version of windows if xp alter boot set up to boot from cd if 98 boot from floppt

Did you check the CMOS battery and the CPU fan. Those are two things that if aren't working the way they should be, then some computers will not boot up. Try this first then post a response if you still can't get it working.

Are you attaching them properly
if so then it is something other then power supply
something has caused both power supplies to blow
have you installed anything in the first emachine you talk about