error: "Cannot communicate with scanner. Cable may be disconnected (which it isn´t) or scanner may be turned off (sure isn´t). Check status. Code: 2,155,0. Any usefull advise will be much appreciated.
...error occurring is if there is a conflict with another TWAIN compliant device, such as a Digital Camera or scanning device (including Multifunctional devices. If you have such a device installed try ...
Question about HP Office Equipment & Supplies
...error occurred communicating with the scanning device. Please ensure that the scanning device is connedcted properly and try again" which I did and still I get this message. Can you please help!! Hai ...
Question about HP Office Equipment & Supplies
...tests to verify the defect..replace USB/parallel cable first..see if it still occurred..Communication is from scanner to PC.. See if it can help.. mastergani Error communicating with scanning ...
...error has occurred communicating with the device. Make sure that the device's power cord and cable are properly attached and plugged in. Refer to HP service and support on the web for more help with ...
estudio232 error C550 an error of C550 how to fix it RADF I/F error: Communication error has occurred between the RADF and the scanner.
Question about Canon PIXMA Office Equipment & Supplies
...Error communicating with device. Seh Exception Error! An error has occured communicating with the scanning device. Please ensure that the scanning device is connected properly and try again. Scanner ...
...error occurred with scanning component. Please advise on how to solve this problem. First try to scan from the scanners and camera wizard in control panel to check the communication between the ...
Question about Toshiba Office Equipment & Supplies
...error has occurred between the RADF and the scanner. C551 Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed. C570 Communication ...
...error between the reader (scanner) and the DC controller board. This code usually occurs when the cable that joins these two units has come loose. Shut down the copier unplug the cables and re-attach ...
1,091 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions