Xerox Phaser 7400/N Printer "reseat drum error" Questions

...drum carriage. 2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums. 3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the ...

...drum carriage. 2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums. 3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the ...

...is for the drum unit, it may just need reseating or changing. The best thing is to take it out, give it a clean and reseat it. Hope this works for you. Call service 7410 drum unit non-installing ...

...drum unit and reseat it. Restart the printer. If the error still continues then replace the drum. You can also look in the install slot for the magenta drum to see if there is any visible

error code sc364 reseat or replace black drum unit. Open left side 1 screw and reseat drums

...error 59.0240 error 59.0240 This error is indicative of a motor not working properly. Reseat all cartridges and drums and remove and reseat the belt. I've seen the belt cause all kinds of

...comes back, remove the black image drum and reseat it. The image drums(one for each color) sit below the toner cartridges. If the error still comes back a tech is going to have to look at the

...k toner 543 c5150 How do I fix toner empty error when I just put a new toner in? Try reseating the toner cartridge, it might not be in good. Reseat the whole drum unit (the part the toner fits

...reseat all of the toner cartridges. For more information about reseating toner cartridges, refer to the user's guide for your printer manufacturer. -While reseating, clean the toner cartridges with ...

...but during initialing error code returns. That error is image yellow drum up/down senser. Shut down your printer and reseat the drum make sure it is loose and not tight when placing it into the