Question about Brother MFC Office Equipment & Supplies
properly. Colour pictures are distorted,and will not print black ink at all most likely your ink nozzles have clogged up. try several cleanings, if it still does not work, you probably have to get the
...properly seated, and then I used the menu to go through the head cleaning process. I cleaned the heads about a dozen times. Still, only the black and cyan print. The magenta and yellow are not ...
...clean clogged printheads, see http://www.fixyourownprinter.com/kits/Epson/K70 for an equivalent product. It's also possible the print head or the electronics have simply packed it in. Try this: Looks ...
Question about Brother MFC Office Equipment & Supplies
...Printhead built on the cart.(it's what actually spits out the ink from the cart.) if they become clogged with dried ink, they will give poor performance. you may have gotten a cartridge that got to ...
Question about Brother MFC Office Equipment & Supplies
printhead is clogging quickly, from built up residue. Clean it manually with proper solution, and a cooton bud, or wipe. Run a clean again. Cartridges can also get air bubbles which can cause faint or
...properly. If the ink doesn't flow the print head won't sense the new cartridge. Also make sure the print head is not filled dried out ink. I had this happen to me before try another then take the bad ...
Question about Brother MFC Office Equipment & Supplies
...Sometimes letting it sit overnight allows the head to fill with ink. I have had very good luck with this method, also some will not clean properly, just depends on how bad it is clogged. Good
Question about Brother MFC Office Equipment & Supplies
...properly, ink cartridges are brand new and installed correctly. I plugged and unplugged, shook cartridges over napkin to see ink drip out, so they're not clogged. Did head cleaning twice, still test ...
properly, repeat steps 1- 8 again (and yes, wait another 24 hours!). The way this works is that cleaning solution is able to wick up into the printhead nozzles and break down the clog. However it does
Question about Brother MFC Office Equipment & Supplies
your purge unit isnt cleaning the print head properly. try to lightly clean the printhead with warm water. If that doesnt work you can sometimes find the printhead online for cheap and try that method
1,189 questions posted
Usually answered in minutes!
1,135 Questions
743 Questions
623 Questions
406 Questions
381 Questions