Epson Stylus 1000 InkJet Printer "print screen button think pad" Questions

...print on paper but the paper fed in & then I got message "paper jam etc. Tried all I could think of, turned off & on numerous times, checked all - next got General Error, told by friend to hold ...

print command I did the following: Held down the Power and Stop buttons for 7 seconds ( the upper screen should go blank at the end). Then I unplugged the power cord for a few seconds and then plugged

screen and look in the right hand column for the "status" message. It should tell you what the problem is. Mine is currently telling me it's jammed but there is never any misfed paper, it just doesn't

...screen 'page too complex' Any other users have this problem? Description The device could not print the current page because of its complexity. Recommended action Press ENTER to clear the message. ...

screen. Shut the entire machine off, and wait about 10 seconds, and then turn it back on again. Test it out. For good measure, you should probably also do a Full Gradation Adjustment at this point, by

print head against the carriage assembly. They are thin silver springs approximately 64mm or 2 1/2 inches, set at an angle. If the spring is out of place, press the spring back into place. You can use

...button! This triggers a 4 color test print and will show all the black jets and color strips for the color jets. If everything is clean (and it's going to be a LOT cleaner now!), you should see nice ...

screen that says " Copying...." if not, try it over and over. you might find another way to fix YOUR problem. Then i printed a doc from my computer and it worked. After that, I scanned something to my