...Fuser temperature is low. 4. Thermistor is defective. 5. Fuser Lamp connector is disconnected. 6. Fuser Thermostat is defective. 7. Fuser Lamp is defective. 8. HTC PCB connector (CN716) is ...
...Fuser unit temperature too low. Faulty thermister, lamp or PCB. Check fuser for jammed paper. Code reset required, Hi, Although resetting your fuser can get you by for the short term - sadly and ...
Fuser Low Temperature which occurs due to Abnormal Hot Roller Fusing Lamp Lower Limit Temperature Detected. Try turning off & unplugging the copier for 10-20 minutes to check if error code resets.
...fuser. Heat roller abnormally low temperature content: heat roller abnormally low temperature.reset: pressp/# --> * --> clear --> * --> 14 --> startcause:1- thermistor failure2- heater ...
What does the error code c-6050 means Low fuser temperature you can try to reset the C-code from tecnical menu, but i can't give you the code. If the problem persists, the fuser unit has to be changed
Question about Canon Office Equipment & Supplies
...error e-000000-0000 occur in canon ir3300 e-000000-0000 means low temperature so you have a problem in the fuser unit> check HEATER lamp, thermistor in the fuser unit and then reset the
...fuser temperature. Heat lamp, thermoswitch, thermofuse, thermistor, SSR E001 High fuser temperature. Thermistor, SSR, pinched wire E002 Low fuser temperature. Same as E002 E003 Same as E000/E001 E010 ...
...fuser unit failed to reach the standby temperature. Leave the printer off for at least 10-15 seconds before turning it back on. This gives the printer's engine board a chance to reset. Make sure ...
Question about Copystar Office Equipment & Supplies
...fuser temperature problems I have a Copystar CS-1500 copier in the field for 3 years with just 3,800 copies on it which gave me a c-6020 code. I reset the fuser code "Simulation 163" which reset ...
...Fuser low temperature after wait period or warm up in standby. Faulty thermister, lamp or PCB. Check fuser for jammed paper.Reset required, if you success good otherwise contact dealer.for resetting. ...
67 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions