BTR, and the error message goes away. There is no circuitry or counters involved. The BTR collects waste toner, and when it is full, the obtical sensor that "reads" through the BTR becomes obstructed,
Question about Xerox Office Equipment & Supplies
error code 9-342 at start up / docucolor 12 That is a BTR contact failure. The Bias Transfer Roller is not making proper contact. Most likely time for the BTR assembly to be replaced. Likewise I had ...
...luck. The error signifies a problem with the 2nd btr retract position. Check the life remaining on the 2nd btr, also clean the 2nd btr retract sensor, and inspect sensor and gears for
...error "BTR Life Over, Replace BTR". I have installed a new black toner cartridge but can't clear the error message. Tally Genicom Intelliprint 8026DN BTR = Bias Transfer Roller, not the toner ...
...BTR movement. resulting in the error code. This would only apply if:While watching the machine warm up, you will notice that the 2nd BTR assembly cycles about 4 times before coming into ready. - -At ...
...error message: BTR Cover is open (077-302) Where is BTR cover? I could not find please help- thanks the BTR cover is also called " Bias Transfer Roller " cover it should be that roller that seen when ...
Error code 009-349 Funzioni di stampa disabilitate The 1st BTR did not reach the retract position. Initial Action Clean the 1st BTR Retract Sensor ( PL 5.4) and check for damage. Check the 1st BTR ...
...There's no reset for that error, the error indicates that the 1st BTR did not reach the retract position. Try clean the 1st BTR Retract Sensor and look for damage. Also check the gears for
...error 9-342 I have changed the btr assembly i have also changed the btr clutch in the back of the copier. The code keeps returning ?? Help In Spanish Quita la tapa de el drawer Obseva la media lunita ...
...error: BTR 2 Error The input of 2nd BTR Retract Sensor does not change when 2nd BTR is initialized. There area couple of things that cause this problem. I would suggest you obtain a service manual ...
3 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions