Question about OKI MICROLINE Office Equipment & Supplies
...characters when printing w/our okidata - 395 the top part of the characters are cut off. Does the printhead need replaced? Tina Yes quite possible pin broke on head, check ribbon is fitted
Question about OKI MICROLINE Office Equipment & Supplies
...ML 520 has recently started printing about a half inch (or 2-3 chaacters) too far to the right. I can see it actaully printing to the rubber roller. I dont see any configurations to change left/right ...
Question about OKI MICROLINE Office Equipment & Supplies
...ml of ink used overall. The Lt Cyan printhead may have been damaged by the paper jam. I recommend removing all the printheads and power cycling the machine (turn off then back on) Install the ...
...printhead was not seated properly, but did not elaborate further. I have a working ML 393 right next to it, and as far as I can tell, both print heads are seated exactly the same. What am I missing? ...
Question about OKI MICROLINE Office Equipment & Supplies
...printhead area on cart will be flooded with ink. Removing couple of ml from cart will stop it leaking. 2) If the cart looks clean (not leaking), stamp the printhead on some folded tissue paper or ...
...ml 2855 but it is still displaying toner low. Is there anything else I should be doing other than changing over the cartridges To solve the printing problem.. # Hold the cartridge upside down, with ...
...printhead is filled with 8 ml ink After disassembly - clean the printhead with fluid compatible with pigment ink (for black color) or compatible with water based ink (color printheads) during ...
...printhead cleaning solution by 1:10 for the C/Y/M colors only. You can refill an amount of 11 ml (1 ml cleaning solution + 10 ml ink) into the C/Y/M ones and an ink-only of 20 ml into the bk one. In ...
Question about OKI MICROLINE Office Equipment & Supplies
...ML 1450 laser printer will print several pages with a solid column of toner on the right side of the page and the rest of the text distorted. After a while the problem stops and the printer prints ...
...is not printing. Does it need to be cleaned? If yes, how do you that? HiI think it does need 'printhead cleaning'.The printer uses a lens on the Laser Scanning Unit.So instead of emitting ...
61 questions posted
Usually answered in minutes!
259 Questions
51 Questions
17 Questions
20 Questions
17 Questions