20 Most Recent OKI MICROLINE 320 Turbo Matrix Printer Questions & Answers

Is this a networked printer? You may need to reload the print driver into your computers. Most printers are generic enough that computers will recognize them and automatically install the drivers. Sometimes you need to go to the manufacturer's website and download the drivers you need.

OKI MICROLINE... • Answered on Nov 16, 2017

The problem your having is a spacer motor. It's located under the carriage that holds the ribbon/printhead. The part number is 56513701. Available at Seattle Platen - Dale 1800-221-2388.

Here's a free copy of the Okidata 320T service manual that will walk you through testing and verfying before ordering the replacement part.

If this helped you, please hit me up with a FIXYA. Thanks.


OKI MICROLINE... • Answered on Aug 08, 2017

Well it sounds like the old inverter had a problem with regulation and it has inturn blown the power supplies in both printers. Without buying new PSU's there is nothing you can do. The Switch-mode power supplies in most printers do not like unstable input and that is what your inverter gave them.

OKI MICROLINE... • Answered on Aug 07, 2017

Unplug the network cable and restart the printer. If it sits there doing nothing then the PC's job that you sent to it is the problem. If however the printer although unplugged from network starts printing again then yes the printer memory is messed up and you will need a new main pcb as you cant clear its memory as its integral with the board.

OKI MICROLINE... • Answered on Jul 26, 2017

If you need oki data customer service number, then you can contact with us, okidata customer service 1866-877-0191 for online help. For further Info Click: https://goo.gl/Ltis3S slide1-ymukdlto0iojz4nd3se3t5yk-4-0_0.jpg

OKI MICROLINE... • Answered on Jul 22, 2017

check the mesage in your operating mannual

OKI MICROLINE... • Answered on Jul 08, 2017

Solved this problem by going into the bios and changing the port from ECP to EPP, and then uninstalling the ECP port in device manager and replacing it with a standard parallel port configuration, no problems since doing that.

OKI MICROLINE... • Answered on Mar 24, 2017

The only thing that coould cause it to malfunction like this is a defective main board. Replacing the machine would be recommended as the board is rather expensive.

ebay has quite a few under $100


OKI MICROLINE... • Answered on Jun 18, 2016

need more info. is it hooked up usb or parallel? Are you printing from windows or like an AS400 or OS X. What error is the alarm light blinking or just stays on?.

OKI MICROLINE... • Answered on Jun 18, 2016

Remove the plastic shield on the ribbon, you may get a bit of ribbon rub, but it's normally not noticeable.

OKI MICROLINE... • Answered on Dec 28, 2015

Its more likely that the problem is cheap ribbons or old ribbons as they dry out with age.

OKI MICROLINE... • Answered on Jun 04, 2015

If not using track feed paper this printer should have a setting for paper height. If its set too high the
rollers wont grab the paper. Also look for any paper that might be jammed or caught up in any of
the roller mechanics.

OKI MICROLINE... • Answered on Mar 15, 2015

Sounds like the media detect sensor is jammed or broken. Remove the platen and check underneath to make sure a label has become stuck over the sensor which would trick the printer into thinking it always has media.

OKI MICROLINE... • Answered on Nov 12, 2014

Check your printer driver and the communication cable. These are the two most common causes of this issue.

OKI MICROLINE... • Answered on Oct 06, 2014

Not finding what you are looking for?
OKI MICROLINE 320 Turbo Matrix Printer Logo

374 questions posted

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

388 Answers


Level 3 Expert

13435 Answers

Alvin Barnabas
Alvin Barnabas

Level 2 Expert

136 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular



Most Popular Question

printer skipping

  • Office Equipment & Supplies