Even once I've listened to and deleted my voice mails, the red light will not go off. Any suggestions?

Likely the two ring answer is "toll saver" You'll need to retrieve new messages. Once all new messages have been reviewed, it should return to the programmed number of rings, see "ring time" in the manual.

ALL messages may be deleted as follows;
delete all messages With the phone in standby, press Delete; press Delete again to confirm.


If answering system messages have been retrieved, a continuing flashing indicator could be your voice mail service;

Voice Message Notification • If you subscribe to a voice mail service, your phone can notify you when you have a new message. This feature supports Frequency-Shift Keying (FSK) notification. Contact your voice mail provider for information. • When you have new messages, the display shows a message icon. After you listen to your messages, the message icon turns off. If it doesn't, you can reset it. With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes
A copy of the manual is available from Uniden;

A copy of your manual can be downloaded free of charge from;
http://www.uniden.info/download/ompdf/D1788om.pdf

Delete voice mail by going through the keypad on your cell phone. The actual procedure depends on the kind of cell phone that you own. For example, on the Nokia 1100, hold down the "1" key while you are on standby. Tracfone connects you to your voicemail, where you can follow spoken menu instructions to listen to your voicemail. After you hear the voice message, you're asked if you want to delete your recordings.

This is not recommended, because connecting in this way uses up your minutes even if you just want to listen to them.

Use your landline phone to delete messages if you want to avoid using your Tracfone minutes. Turn off your cell phone so it doesn't ring and then call your cell phone number from a landline.

Press the "*" (star) key as soon as you hear your voice mail greeting. Then enter your password number and press the "#" (pound) key.

Listen to the instructions for accessing your voice mail, which can vary slightly depending on the phone you have. You are told the number of new and old messages you have, how to listen to them and how to store or delete them. Press the number for listening to the message to hear it, and then the number for deleting.

Yahoo Mail upgraded recently. There is no way to return to the old version.

I would suggest attempting to get used to it, everyone will have to once the transition is fully completed.

Many people are voicing the same concern, but I doubt that Yahoo would listen to these complaints and change the mail program back. They may tweak it a little bit, but I think that's all they would do.
var geo_Partner = '1890d1e7-e721-4f9c-b474-1a19eda23e94'; var geo_isCG = true;

It is a message indicator light, and very aggravating when you've listened to the messages. Two solutions-- First, yes, absolutely once you've listened to your new messages, push the Page Button on the base unit for five seconds until it stops beeping. That should stop the light.
And for me it worked the first time. Not the second time. Then, I found out that the phone's answering machine, which I don't use, had been turned on, received a message (yes, from an automated telemarketer of course!) and then been turned off. So when I turned it back on, I saw "1" on the display. Press delete all messages and the light goes off.
So check the actual physical answering machine too if your phone has one.

Access the main menu of your Samsung Go Phone. Hold the #1 key down until you are connected to the voice mail system. If for some reason pressing the #1 key doesn't connect you to voice mail then call customer service at 1-800-331-0500. You will be connected with an operator who can help you troubleshoot the voice mail problems on your Go Phone.

2 Follow the voice prompts and select "Listen to Messages" from the list of options. Bear in mind that checking voice mail on a Samsung Go Phone will count against your prepaid minutes.

3 Once you have finished you can select the "Delete Message" option from the voice prompt if you wish to clear your voice mail messages. If not, you can simply press "clear" or hang up the phone to leave the voice mail system.

full factory using jaf or ufs gadget will solved your problem.go to the nearest cellshop sir.

Hold the "clear" or "mute" button until the handset beeps. This will clear the New Voice Mail allert.

unfortunaltly no SORRY

Good luck. If you follow all of the above instructions and the red light keeps blinking, that's just the way it is. And that's according to the Philips tech support team. Especially if it's in relation to voice mail icon. The phone appears to think you have a voice mail message even if you've checked it and deleted them all or have no voice mail service whatsoever. So you may be stuck with the blinking red light forever.

I have FiOs and used some of the info I gathered from this page to get my voice mail working now! To set up my voice mail I called my phone number (from the house phone), then pressed * when the automated system picked up...Your prompted to use a 4 digit pass code, which is the last 4 digits of your phone number (worked for me). From there I listened to the prompts and created a new "4 digit pw" as well as a "name password" by the end of the cycle. It then allowed me to listen to the messages on the phone and delete them! Phone finally says ready on it.