Ink tanks are full but paper come out blanks - Canon i455 InkJet Photo Printer

You ink absorber is full then you need to clean it,maybe you cannot see by looking outside but if you disassemble it you can see inside 2 or 3 absorber tank. You can wash it or replace it a new absorber ...
try to put a waste tank outside your printer, you can see the small hose inside that connected to the print head when it park, just add another hose and a plastic bottle to place outside you printer this will be your waste tank now, so when you head cleaning your printer a lot of ink are uses that goin to your waste tank, by doing that it's easy to dispose you waste ink

Canon Bubble Jet orange light flashes

which is the printer

Answer Part 1 of 2

An error has occurred in the printer. The number of flashes indicates the type of error, as outlined below. Check the cause and take appropriate action.
Two flashes: Out of paper or paper feed error
Reload the paper correctly and press the RESUME/CANCEL button.
Three flashes: Paper jam
If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and press the RESUME/CANCEL button.
See Paper Jams
Four flashes: Ink tank is not installed properly
Open the Print Head Cover and check whether an ink tank is installed. If an ink tank is installed, push the button of the ink tank, and reinstall the ink tank properly.
Five flashes: No Print Head installed, or Print Head failure
Install a Print Head.
When the error continues, contact a Canon service representative.
Eight flashes: Waste ink absorber almost full
Ink used for cleaning is absorbed in a waste ink absorber placed in the printer. Eight flashes indicate that the waste ink absorber is nearly full. Press the RESUME/CANCEL button to cancel the error so that you can continue printing.
Important
If this error occurs, replacement of the waste ink absorber and maintenance of the printer are required. Canon recommends to contact a Canon service representative as soon as possible. Once the waste ink absorber becomes completely full, it cannot be printed until the Waste ink tank is exchanged.

Nine flashes: A specified period of time has lapsed without receiving a response from a digital camera or digital video camcorder / The digital camera or digital video camcorder connected is not compatible with this printer

Saw this problem once when the tape under the new cartridge was not removed. Suggest to make sure the cartridges are correctly installed first. If no luck try cleaning the printer heads with the printer software first... (and then physically if it didn't help). Also check if the ink at the head can "flow". (If the printer was sitting a long time unused the ink can gum up.) If these tanks are refilled / reused they might not be good... some tanks cannot be successfully refilled... have purchased printers where manufacturers recommend against this.

Red light flashing, do printing, paper blank out : ink low message. Ink level low, near to ink out level. But it just program, may be ink tank is out actually (no ink at ink tank). Refiil ink tank or replace w new one. Check Nozzle.

Try removing all ink bins except black then you won't have any problems. You should also be able to go into your printer settings and select "Black and White" or "No Color" and it will print ok. Removing the ink trays is the easiest way though.

factory restore

Here are all the flashing explanations:

Two flashes: Out of paper or paper feed error

Reload the paper correctly and press the RESUME/CANCEL button.

Three flashes: Paper jam

If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and press the RESUME/CANCEL button.

See Paper Jams

Four flashes: Empty ink tank

If you press the RESUME/CANCEL button, it will continue printing with an empty ink tank. After printing is finished, replace the ink tank immediately. If you continue printing with an empty ink tank, it may cause damage to your printer.

Refer to your Quick Start Guide for instructions on how to replace an ink tank.

Five flashes: No print head installed/Defective print head

Install the print head. Also, ensure that the protective tape has been removed.

If reinstalling the print head does not solve the problem, replace it with a new one. Contact the Customer Care Center.

Eight flashes: Waste ink tank almost full

The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, contact the Customer Care Center.

Two flashes: Out of paper, paper jam or paper feed error
Replace the paper correctly and press the RESUME/CANCEL button.
If paper has jammed in the printer, clear the jam and press the RESUME/CANCEL
button.

Three flashes: Paper jam
If paper has jammed in the printer, clear the jam, replace the paper in the printer
correctly and press the RESUME/CANCEL button.

Four flashes: Empty ink tank
One of the ink tanks is empty. Replace it.

Six flashes: No print head installed
Install a print head.

Seven flashes: Defective print head
Remove and reinstall the print head.
Also, ensure that the protective tape has been removed. If reinstalling the print head
does not resolve the problem, replace it with a new one.

Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight
flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL
button to cancel the error so you can continue printing. Before the waste ink tank
becomes completely full, contact a Canon service representative to have the waste ink
tank replaced. Canon recommends to call for service as soon as this error occurs. Once
the waste ink tank becomes completely full, printing will be no longer
possible.