Connecting laptopto printer wirelessly

You can only connect your printer to your PC via wireless, not to the internet. Your MX340 is not WiFi capable and is not a computer. Linking it to your PC via wireless just saves you having to connect it by cable.

Certain models of Acer desktop computers are designed with wireless capabilities.
These capabilities can be added to an Acer desktop system that does not connect wirelessly with either an internal or external wireless card, depending on the computer's configuration.
When the wireless connection is not working properly, you can troubleshoot the issue yourself.
The troubleshooting process eliminates the problems that may be preventing the Acer desktop computer from connecting wirelessly.

Check to see if any other computers at the same location are able to connect wirelessly.
The issue may reside with the wireless router or access point.
Power cycling the router or access point may resolve this issue.
Verify that the wireless adapter is enabled.
Click the "Start" button, then "Control Panel."
Click "Network and Sharing Center," then "Change Adapter Settings."
If the wireless adapter is disabled, right-click on it and select "Enable."
Connect to the proper wireless network.
The Acer may be attempting to the connect to the wrong wireless network, or it may have lost its connection to the correct network.
Click the wireless network icon in the task bar.
Click the proper wireless network, then click "Connect."
Enter the network password (or WEP key) if prompted.

Sorry. That model desktop computer did not ship with wireless capabilities. You can generally purchase a little wireless USB dongle online or at Best Buy, Walmart, etc. for around $20.

Hi,
This printer does not come with wireless capabilities. But if you want to connect it to your wireless network you can buy and external wireless USB print server which can help you connect your printer wireless.

Second Button on your left

Your printer can print wirelessly through bluetooth only.

note that your computer must be bluetooth capable also.

here's an instruction. Bluetooth Setup of Hp C5580

To go Wireless on your desktop Acer Aspire L3600, you should consider buying an USB Wireless Adapter. It could be any brand as long have same frequency with your Netgear (i.e 2.4 Ghz/5.8 Ghz)


P.S.: If this information was helpful, please rate this solution.

Make sure the wireless LAN of your computer is set to AdHoc mode if the Printer is set to that function.

You may call HP Tech Support At toll free- 1-800-585-2494 and ask any technical question to hp support agent. you may also contact them via chat support by visiting: HP Customer service . hope this will help you better.

Although you have internal wireless, you are capable of attaching an external wireless device. For example, you could attached a D-Link WUA-1340 USB Wireless G adapter (http://www.dlink.com/products/?sec=0&pid=477), or, if you have a PCI port, you can use a Linksys WPC300N Wireless-N Notebook adapter (http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1144763513196&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1319686869B07). Either device with any brand will work just like your internal wireless. In fact, because you chose to use an external device, you may get a better wireless signal. Because internal wireless devices are inside the computer, it is more difficult to received a signal than with an external device.