Paper not detect id - 3005 - Panasonic KV-S3065CL Path-Through Scanner

Replace the touch screen its already broken, the light on data indicate No Ink, Jammed paper or any error that you should see in screen. Screen has nothing to do with the data light on. I have printer with the same problem .

http://www.fixya.com/support/t9747999-problem_hp_laserjet_p3005_paper

I would pull out the paper tray, and clean the underside roller. First try to clean it without moving the clips. Use a cotton cloth or lint free cloth and alcohol. Get as much paper dust off as you can. This might help you out.

Sure.... never should be a problem.....Each toner cartridge has a memory card and informs the printer of the amount of toner left.

Just check at upside where paper iscoming out after print, there you can see the two black flips to monitor the paper out position, this flag sensor got dusty this error apprears, remove back cover, you can observe left side this sensor, just clean it..

E2 errors state that the printer lacks paper.

If the printer does in fact paper which i assume it does, that means that the roller/sensor that detects the paper is defective/bad.

Id recommend replacing as repairing the issue is not really cost effective.

Hi,

Welcome to Fixya. If you need a driver for your display adapter just click on the link below. Select the operating system of your computer. You can also download the latest driver for your system.

Toshiba Satellite 3005-304 Drivers

Thanks for using Fixya.

Seems like there's a jam in the paper dispenser. Check the back openings, and the paper tray to see that no paper is stuck there. Also, there is a chance that the paper tray is overloaded. Try loading it with less papers.

I Have had the same problem. I changed the power supply an the error was never detected