How do you clear the counter button on a panasonic KV-S1025C

Have you gone to Panasonics support site and researched tis code.

clean it with wet cloth

Hi,

Try doing Apple update as most of the older device drivers are not available.

Regards,
Sean

Hello, basically, that's the curse of Windows 7. Unless the manufacturer of the peripherals is prepared to support the older stuff by writing new drivers for it, (and, of course, he won't make any money from that!) there's nothing we can do except shell out for new stuff that IS supported under W7. Personally, I'm sticking to XP Pro, as it's never let me down and there's bags of life in it yet. Regards, nicam49

F62 error is a problem with the lamp gain on the rear page camera .
Usually removing the camera & cleaning the optics will sort it out .
The scanner will need a good service & shading adjustment as well .
Only attempt this work if you are familiar with CCD Devices & care, as damage through mistakes can be very expensive .

AP Support Solutions

As you can see at this official link the driver provided here is Windows 7 compatible. In case you have a proble take a look at this "how to" link.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

you should reinstall the driver for this scanner and be sure that the top cover doesn't have any heavy things atop it

Click on the Scanner user Utility at the bottom of the pc task bar it is a yellow box it has a button inside to clear the counter

There's a user utility that installs with the driver & other software. The counters for cleaning & replacement are in that.

If you still have the CD that came with your scanner, put it in and you should be able to install the Panasonic Scanner User Utility. The utility has the buttons to allow you to clear the counter(s). If you no longer have the CD, then this link may help: http://panasonic.co.jp/pcc/products/en/scanner/downl_e.htm#USERUTY