My phone shows me that my bluetooth is paired and my bluetooth's blue light flashes fine when I'm not using my phone, but when I make a call, I can't hear anything on the bluetooth, and the blue light stays on a little longer than usual. I tried re-pairing it, but no luck. Please help?

Step One:
Prepare Phone-
Turn on Bluetooth
For most phones, go to Settings/
Tools menu and select Bluetooth
or Connectivity and select "On."
(Or see the user guide for your
phone.)
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
BLUETOOTH
Discover/
Search
BLUETOOTH
220Plantronics
Headset Passkey
PASSKEY
0000
Step Two:
Prepare Headset-
Pairing Mode
Begin with headset turned off. Turn
headset on (hold call control button
for 2 seconds until the light flashes
blue) and it will automatically go
into pairing mode, flashing red
and blue.
Step Three:
Pairing-
Add Headset to Phone
For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device,
then Select "220Plantronics."
For passkey enter 0000. Headset
will flash blue when paired
successfully. It is now powered on
and ready to use.
NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with
another device, follow pairing instructions on the next page.

hello,

Step One:

Prepare Phone-

Turn on Bluetooth

For most phones, go to Settings/

Tools menu and select Bluetooth

or Connectivity and select "On."

(Or see the user guide for your
phone.)

Step Two:

Prepare Headset-

Pairing Mode

Begin with headset turned off. Turn

headset on (hold call control button

for 2 seconds until the light flashes

blue) and it will automatically go

into pairing mode, flashing red
and blue.

Step Three:

Pairing-

Add Headset to Phone

For most phones, go to Settings/Tools

> Bluetooth > Search or Add a Device,

then Select "220Plantronics."

For passkey enter 0000. Headset

will flash blue when paired

successfully. It is now powered on
and ready to use. hope it works

regards
shaun

hello,

Step One:

Prepare Phone-

Turn on Bluetooth

For most phones, go to Settings/

Tools menu and select Bluetooth

or Connectivity and select "On."

(Or see the user guide for your
phone.)

Step Two:

Prepare Headset-

Pairing Mode

Begin with headset turned off. Turn

headset on (hold call control button

for 2 seconds until the light flashes

blue) and it will automatically go

into pairing mode, flashing red
and blue

Step Three:

Pairing-

Add Headset to Phone

For most phones, go to Settings/Tools

> Bluetooth > Search or Add a Device,

then Select "220Plantronics."

For passkey enter 0000. Headset

will flash blue when paired

successfully. It is now powered on
and ready to use hope it works

regards
shaun

The solution for paring the explorer 240 is found in the bottom of the product page for the embedded link on the User Guide Link. I have also provided the instructions below. I hope this helps

How to Pair Your Phone With Your Headset for the First Time

1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the Power Switch toward the microphone. Wait until the indicator light flashes red then blue.
If you don’t see the red then blue flashes, turn the headset off, then turn it on again. Press and hold the Call Control button until you see the red then blue flashes that indicate pairing mode status.
3 Set your Bluetooth phone to ‘discover’ to locate the headset.
This usually involves going to ‘setup’, ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add a device’.
4 Once available headsets are listed, select your headset (for example 2XXPlantronics or 3XXPlantronics). If prompted for a passkey, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your phone will also confirm when pairing is complete.

John M

Hi to enable Bluetooth follow the steps given below: 1. Click on OPTIONSfrom the main Menu 2. Click on Bluetooth then 3. Click on the Menu key (which is next to track ball) 4. click on Enable Bluetooth If you find any problem please contact the Service Provider of your SIM Thank you for using Fixya

Try this: 1. Ensure that your phone is switched on. 2. If the headset has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the indicator light starts to flash blue quickly. If the headset has been previously paired with another device, switch off the headset, and press and hold the multifunction key until the indicator light starts to flash blue quickly. 3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See the user guide of your phone for instructions. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If pairing is successful, the headset appears in the menu of the mobile phone where you can view the currently paired Bluetooth devices. When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue.

You are holding down the main button too long.  When it flashes blue and red it is now in pairing mode.  To turn on the headset hold down the main button until you see the blue light come on, then let go.  If you hold it any longer this is when it goes into pairing mode.

before attempting to pair your headset with another device, be sure that the bluetooth headset is in the off position

• press and hold MFB until indicator light flashes blue and red. The headset will also beep twice
• to pair your device to the bluetooth headset use the bluetooth pairing instructions from you device's instrucition manual.
• input ID code 0000 when requested by the device
• the headset and device are paired correctly when the blue and red indicator light flashes blue only.

Any questions email: [email protected] Subject: omnitech bluetooth

I just figured out how to reset the 3XXPlatronics 330. The guest might of of made it a little confusing for some:
1) TURN OFF bluetooth head set by holding the volume control button for about a few seconds until it flashes blue.
2) Make sure your phone's bluetooth is on and on discover mode.
3) Turn on the blue tooth head set (NOTE: HOLD DOWN THE VOLUME BUTTON UNTIL IT FLASHES BLUE AND RED)
4) Lastly, go into your search menu to find new bluetooth devices. The device should show up as "3XXPlantronics" (PASSKEY IS 0000).
P.S. Keep in mind this worked for me, but if it doesn't work feel free to email me at; [email protected]

1.Explore blue tooth devices from your motorola phone.
2.it will sure find your blue tooth headset.
3. Make sure your blue tooth headset is on
4.in pairing function select your blue tooth headset