Pixma Ip90v waste ink tank full

IT means that the pad in the printer that absorbs excess ink is full. This costs a lot of money to replace, probably more than you paid for the printer. Just resume printing.

It is called " waste ink absorber error" as well. There is a link here may help: http://www.fixya.com/support/t5461665-waste_ink_absorber_almost_full

just open your printer then at the back of your printer where your ink absorber in located pull out and clean the cotton or replace to new one.

It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

It's not a problem, just a fact of life. The old ink has to go somewhere and when the drain pack is full you need a shop to replace and access the service mode to reset the counter. It involves removing all the top covers, lifting out the print engine and replacing the drainpack.

The old ink has filled the drain pack. It is now full so you need a shop to replace and access the service mode to reset the counter. It involves removing all the top covers, lifting out the print engine and replacing the drain pack.

It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs
You should send it to service centre

It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
You have to send it to your nearest service centre.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

please help me for repair waste in tank full canon ip3300.

Hello,

 

Please try below steps on your Printer and let me know the result. I hope this should work.

 

Steps are:

--------------

 Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

 

This should work. please let me know the result.

 

 

Bye.