At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: MY Pixma IP90v has an error message waste tank full....
It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter. The WASTE INK ABSORBER KIT is approx. USD10/pcs
You should send it to service centre
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Error 4F and Error 48.
Actual Message will be:
Unable To Init 4F
Unable To Clean 48
These messages indicate the Waste Ink Tank is full.
This is the space in your machine that will store all the ink that is used in cleaning the printhead. Once this is full the only way to continue printing is reset the Purge Counter and clean out the Waste Ink Station. If you do the reset and not he cleaning of the waste ink station you will eventually end up with the waste ink tank overflowing and leaving a huge mess to clean up. If you clean out the tank but not reset the purge counter it won't work till then.
Unless you are satisfied with your ability to dismantle and reassemble your printer you may want to just replace it as it can take some time and causes alot of mess.
it is service error . just follow this steps to fix this, 1.hold RESUME then press & hold POWER 2. release RESUME, then press it twice, the light should go amber then green again. 3. you're now in service mode (you can release POWER now)
for reset waste tank reset is 4 presses of the RESUME button. To confirm, press POWER once. Hope this helps. Please rate my response. Thanks. Have a good day.
It's not a problem, just a fact of life. The old ink has to go somewhere and when the drain pack is full you need a shop to replace and access the service mode to reset the counter. It involves removing all the top covers, lifting out the print engine and replacing the drainpack.
The old ink has filled the drain pack. It is now full so you need a shop to replace and access
the service mode to reset the counter. It involves removing all the top
covers, lifting out the print engine and replacing the drain pack.
Inkjet printers have a fibrous pad inside them that collects the waste
ink from cleaning the print head. Over time, this pad fills up with ink
and can no longer hold any more. When this occurs, the printer
indicates a "waste ink full" error.
Replacing
the waste ink absorption pads is something an authorized canon service
facility can take care of for you. Once they are replaced,
it'll be functional again.
It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
You have to send it to your nearest service centre. The WASTE INK ABSORBER KIT is approx. USD10/pcs
Read it all here. Scroll about half the page, to:
WASTE TANK ALMOST FULL
or FULL ERROR MESSAGE PROBLEMThere is explained how to get rid of the error message very easy, and how to clean the waste ink pad manually. The latter seems not to be necessary, though.
×