Whirlpool LSQ9610L Top Load Washer "splice washing machine plug" Questions

...a 70 series washer. It fits just fine. But the plug is different. I spliceing the old plug onto the new switch acceptable Yes, you can splice the new switch to the old plug and it will work just

MACHINE WON'T PUMP WATER OUT, STARTS WASH CYCLE THE WASHER GETS TO POINT WHERE IT SHOULD PUMP WATER THEN JUST STOPS. TRIED TO MOVE IT ONTO DIFFERENT SETTING TO PUMP OUT AND WOULD NOT WORK. SOUND LIKE ...

machine it was I could instruct you to by pass it. If it is a whirlpool or roper it can be jumped under the control panel at the plug on the lid switch side by splicing the gray wires together, ignore

...pump back and get the right one. If the colours are the same you can splice and solder / shrink wrap the old plug to the new pump wires. https://www.google.com/search?q=Gorenje+Washing+Machine+E7

...Plug Do you know if it is possible to splice a power cord for a washer and dryer with a quick connect or something similar? I am having problems with my neighbors using it without permission. I guess ...

washing machine, top loading, model 110.82870120- will fill but won't agitate, spin, or drain. Washer fills with water as usual, but will not agitate, spin, or drain. You can hear the timer ticking as

...with a Little Knowledge will get Your Job Done. A Few will Require Tieing in wires with ****

...splice it because I can't get to the inside of the plastic part that the wires go into. Do I need to replace this part? How? What is it called, and how do I safely detach it? Go to ...

...splice jaws, re insert the wire and push back together. Plug it back into the pump, and that's it! LD flashes when the water level does not change after the drain pump is on. Check the following: Is ...

splice the 2 outside wires together (usually tan and grey colored - NOT THE GREEN ONE). Reinsert the plug, close the control panel and you'll be all set.  Don't listen to anyone who tells