Dyson DC14 All floors Bagless Upright Cyclonic Vacuum "hose vacuum low suction" Questions

...vacuum, pet brush suction very low. Was working fine last time I used it. Have had it for about 8 months with no probs. Clean filters every (or sometimes every other) time I use it. You may have a ...

...vacuum without the hose attached? If it is ok, then there is a clog in the hose. If it isn't, then check filters, is the speed variable, is the contol set too low. Could be a bad motor, running too ...

low. this started about 1 week ago. I checked the hose and it is clear. I also went into the attic and checked the pipes(as far as I could see them) and they appeared to be intact. 1) Have you checked

...hose but none on the floor, it's usually in the brush head (clog or broken belt) Good luck what is wrong when a kenmore vacuum cleaner 360 brush roller will not turn but the motor is fine? There are ...

...vacuum for a couple of months and it seem I have a similar problem but there is no clear blockage. It seems like I don't have adequate suction that reaches the accessory hoses nor the main one. I'm ...

...hose, but the carpet brush roller attachment works fine. Any ideas? This style of vacuum has great airflow but does not have great suction, especially at the end of the hose but it still should have ...

...low at the tank after you disconnect the hose? If it is strong there, then the hose may be clogged. You can unhook the hose from the wands to see if you have suction or not. If you do, then look ...

...hose and when used as an upright. Hi Tina. I understand how frustrating no suction can be for I have the same vacuum at home. Dirty filters or clogs can reduce the suction. Here is a quick link to ...

...hose has no suction Smelt a burning. After cleaning all filters the vacuum only came on when it was in a vacuume position. It's appears to be running at about 10 % suction the hose section does not ...

...vacuum, nothing picks up. I tried checking every aspect, but I don't seem understand the cause for this problem. Check the tube that leads down to the brush head for clogging as well as any motor or ...