Fujitsu Siemens PlasmaVision - Recent Questions, Troubleshooting & Support
My fujitsu plasma tv has sound but no picture
check connections most likely culprit is a blown fuse on the screen mainboard very easy to replace but must be soldered unless you use a little bit of copper wire twisted and rolled up to cover both ends of the internal fuse then stick it down with insulation tape but do this at your own risk
on Nov 12, 2013
We have our cable box
Ok, I need more verifications:
1) Your TV is Fujitsu Siemens PlasmaVision P42VHA40 Monitor which does not have tuner? If not, please provide the make and model of the TV.
2) What kind of cables you are using to hook between the cable box and the TV? HDMI? Component video (Red, Blue, and Green cables withe RCA plugs)? Composite video cable with Yellow RCA plugs?
3) Are you trying to get the sound to come out off the TV speakers or through the stereo system?
on Feb 03, 2011
Need to connect my DSTV decoder through my sony
well this is easier than you think, get yourself a set of RCA's (the red and white and yellow cables that DVD players come with) look behind your decoder and place them colour to colour, then behind your Amp you will read (TV IN) do the same, then with just one yellow RCA plug it into (monitor) that one will then go to the (AV input) behind your TV.. And presto!!! now set your amp input on the remote to TV and your off!! good luck
on May 03, 2010
I have lost audio device and drivers on my
try this ,
download this software,no need search engine,no more tired of looking
anywhere...instantly,it will be in your laptop for several
KEY : JCCQ-MAKC-KACK-6TSE-BN35
Driver Robot updates:
* Sound card drivers
* Printer drivers
* Video card drivers
* Motherboard drivers
* Webcam drivers
* Wireless drivers
* Bluetooth drivers
* FireWire drivers
* Ethernet drivers
* Windows XP drivers
* Windows Vista drivers
* USB drivers
* Chipset drivers
* AC97 drivers
* DVD drivers
* Router drivers
just install it,scan and download... enjoy...
on May 26, 2020
Upgrading my fujitsu amilo pro v2010
It's not a problem as u think..
Yes your Ram is 256 M.B // but your Vga Card is built in the mother board with 64 M.B ..so it's share the Vga card Memory from ur basic ram (64 - 256 = 190~192 M.B) .
So u just need to increase ur rams by new one or replace this ur current ram by 2g.byte ram .
on Feb 25, 2019
Not finding what you are looking for?