Fujitsu Siemens PlasmaVision - Recent Questions, Troubleshooting & Support - Page 8

tell about the problems

The Function keys can be usually disabled by a manufacturer provided program, in the control panel. You can also probably download a replacement from Fujitsu. Fujitsu America Support If it is a hardware problem, it should be coming up as a keyboard error on start up, it will not say which key is stuck, so this is probably a software issue. The manual is listed below for the function key use. http://solutions.us.fujitsu.com/www/content/pdf/usermanuals/sseries/S7010,S7010D_ONION_USERGUIDE.PDF

Depending on the Microsoft product you are talking about. It should be located on the bottom of the laptop. If it is Microsoft Office product it should be in the PKC or Box with the DVD for 2003-2010 versions, and it for 2013 version it should be tied to your Miscrosoft account @ www.office.com

Pressing the [F2] key allows you to check and correct the settings in BIOS setup. After the correction an error free system start is possible again. http://manuals.ts.fujitsu.com/file/8423/d2785-bios-en.pdf This link can help you as well, good luck.

I want to buy a graphics card for my lapptop fujitsu siemens amilo xi2528. Anybody wants to sell me, let me know on the following contact nos. My current location is Abu Dhabi - UAE Email: [email protected] [email protected] Mobile: 00971 50 1475321

Here is a link to try: How to factory reset laptop with recovery partition

As an update to this, I've been able to boot it up a few times since posting this, but it never gets as far as being able to boot up an entire operating system before freezing.

You need to take apart the laptop to do this. Why not simply attach a portable USB keyboard which will work just as well?

Click here to download and install the drivers.

Dear david readYour dvd rom is read only,you need a dvd writer to be able to burn cd and dvdBest RegardsMazagange

Can you please clarify that on which drive your files were present before you did a repair??

Please tell us the laptop model number to receive detailed instructions. Normally, the correct driver has to be installed and you have to open connections and make sure that connection is enabled. Please let me know if you have any other questions.

If it is a laptop keyboard, it will have to be removed and replaced with a new keyboard. If it is a desktop PC, unplug the keyboard and buy a new one.

You should be able to unlock the touchpad by pressing the Fn button and while holding it down press the F6 button once and release both. If this doesn't work go to Control Panel and Device Manager and check that the drivers are installed and the device enabled. If these don't work you probably need to re-install the drivers. Cheers

WHICH VERSION OF WINDOWS? Try an older version if it is an older laptop. Try xp.

If you forgot your BIOS password. see this... http://www.wikihow.com/Break-a-BIOS-Password If you forgot your windows Account Login password, the following page is a good description of your choices... http://pcsupport.about.com/od/tipstricks/tp/find-lost-windows-passwords.htm Also, check out... http://ophcrack.sourceforge.net/ If the above does not work, and you have important files that you don't want to lose, you could try this... Pull the hard drive out, and use a "USB Hard Drive Adapter" (available fairly cheap online) to connect the hard drive to a friend's computer, and save all the personal files (documents, pictures, etc.) you can to a folder on the friend's computer or an external hard drive. At least you may not lose you files.

drivers here: http://support.fujitsupc.com/CS/Portal/supportsearch.do?srch=DOWNLOADS&Series=S%20Series&Model=S752&ProductType=Notebook%20PC

This could be one of many possibilities. Check all your fans, too make sure they are running, especially if your CPU has its own fan, and you have good open ventilation around the cabinet. If someone has tweaked (overclocked) the CPU you could boot into the BIOS and use the factory default settings to undo any tweaks. You could also re-seat the CPU heat sink (rarely needed), which requires a tube of CPU heat sink goop and careful cleaning to get the old goop off. If you have open vent space, you could add another fan to the cabinet, close to the CPU area. Good luck.

not recommended but yes it might just be a loose connection or dry joint, just be carefull there are live capacitors inside which might shock you