Question about Fujitsu Siemens PlasmaVision P42VHA40 Monitor

Open Question

Why does my Fujitsu P42VHA30AS not recognise composite video

I have bought a digital receiver which only has scart, Composit and hdmi outputs. I got a hdmi to Composite converter and connected to my fujitsu plasma but there is no signal to the screen.

Posted by Anonymous on

Ad

5 Related Answers

sandrew

andrew pester

  • 2961 Answers

SOURCE: ref fujitsu siemens amilo pro v2040 problen

You will then need to repair windows, ensure your cd drive is set as first boot device in bios and insert windows cd and press 'R' for repair instead of install when all the setup files have loaded.

Posted on Jan 16, 2007

Ad

D-MAC852

  • 34 Answers

SOURCE: My fujitsu siemens desktop will not start up. All

Try resetting the system BIOS for the MB. Usually a jumper on the MB that clears CMOS and puts it back to the defaults. Does this have onboard video or a seperate card?

Posted on Jul 01, 2009

Ad

David Shaub

  • 2976 Answers

SOURCE: Fujitsu Siemens Black Screen problem

Hold the power button in for a few seconds, until it powers off. When it reboots, change your power settings. Don't shut the monitor off after any time span, it isn't necessary.

Posted on Aug 08, 2009

Anonymous

  • 10 Answers

SOURCE: 'USB device not recognised

Hi Peter,

Try this solution. Just follow this step to uninstall and reinstall the USB drivers. I am assuming that you have a Windows OS.

1. click START
2. right click My Computer (an icon of this can also be seen on the desktop)
3. left click Manage
4. Computer Management will appear
5. look for Device Manager and click it
6. on the right panel, you will see Universal Serial Bus controllers
7. expand that by click the plus (+) sign next to that
8. delete everything under that by highlighting each one of it, then on the keyboard, just press delete
9. once finish with everything, just reboot the computer

Let me know if this works.

Jon

Posted on Oct 10, 2009

RescueTechLA

RescueTechLA

  • 2653 Answers

SOURCE: Vertical lines on screen on Fujitsu N6010, not

If no lines via monitor then the lcd is going bad. Only way to fix it is to replace the lcd. SOMETIMES it's a bad lcd video cable but it's rare.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a UK satellite receiver with Roa input and scart output and want to connect it to a hdmi TV. Are there any scart to hdmi connectors and will that work or do I need a convertor as well?


Simply using a cable with a scart connection at one end and an HDMI connection at the other will not work as scart is an analogue signal and HDMI is a digital signal and so you will need to buy an HDMI to Scart Converter/Adapter to change the signal.
There no such thing as Scart to HDMI Cable HDMI Hero Splitting HDMI pictures has never been easier

Dec 22, 2014 | Televison & Video

2 Answers

Connecting Digital Decoder to Analogue TV.


The av channel is 0 and then you need to search on channel 0 as i mean tune into the channel

Sep 14, 2008 | Televison & Video

2 Answers

Hdmi converter



HINIT, HINT. THIS MAY HELP

Aug 31, 2014 | Computers & Internet

1 Answer

Denon 1312 receiver composite video inputs do not work.


I'm having the same problem with my Wii output. The manual for the Denon AVR-1312 says that analog video signals (i.e. component/composite outputs from the Wii) are not converted to digital video signals (i.e. HDMI output from the rcvr). I'm running only HDMI to a projector, so the video signal is essentially lost. The fix appears to be to run an additional composite cable all the way to the projector. Sounds like your fix is the same. No Wii tonight! :(

Jul 07, 2012 | Denon AVR-1312 5.1-Ch A/V Home Theater w/...

1 Answer

HOW I CAN HAVE OUTPUT FRO AUDIO LINE ROM LG 55LH5000???


Hi, sorry but Most LG's no longer have audio outputs. The easiest way to get it ,You need to take the audio output from the source i.e. "cable box output"..if you have of course...
However whether your TV has this output or not we need to make some tests..5 different connections possibilities provided below.
(not by priority..you can start with any of it ).Below ,there is a sample TV back panel picture as well
Possible CONNECTIONS:
1) 2x RCA ports red / white is audio out ( L + R ) of TV to Stereo..
2) You can get also the audio digital output from the TV to a A/V receiver. the tv's optical audio out is stereo only mainly designed for freeview or tv audio to be output,
set the audio ouput on the TV menu to Dolby Digital, connect a digital optical out directly to the A/V receiver to receive audio signals.
3) since your TV has :2 x HDMI, SCART, AV, Component Video, VGA-sub, USB 2.0, connections,you may use the SCART plug to get Audio output for your TV .
TV's SCART connector which has 21 pins and "2x Audio Output " pins should be in it.
you need to buy an adapter called " RGB Scart Male to 3 RCA AV Female Adapter Converter" that can easily be found any electronic Market..one example as found eBay URL is below..
http://cgi.ebay.com/RGB-Scart-Male-3-RCA-AV-Female-Adapter-Converter-/130389078197
After you get this adapter,you need to carry the audio signal from SCART's RCA plugs to your Receiver with a 2x RCA (white/red ) cable.(if this does not work ,mfg should state somewhere in the manual..as your TV's "SCART socket IN only" ) if you properly connect IN/OUT plugs you will able to get the audio signal of the TV thru stereo..I recommend 2 $ value "RGB-Scart-Male-3-RCA-AV-Female-Adapter-Converter" with IN/OUT switch on it.
4) use HDMI connection of TV if you have HDMI input on your stereo of course...
5) if these are not an audio-out on one of these connectors , so you'll need to use the headphone socket if you want to plug it into a stereo. you need a cable 2x RCA to 3.5mm Headphone jack.
( This is the last ditch solution , since it mutes the whole sound.) ..
NOTE: if you connect this, pls be careful,your TV voice level will drive the stereo volume....

Hope this helps!..if more help requires Would you please let me know the result ?
Take care and please
Remember to rate/vote and give me 4 Thumbs Up for us
to continue f
or Helping out the Community :)


kerguney.jpg
moz-screenshot.pngmoz-screenshot-1.png

Jul 09, 2011 | Televison & Video

2 Answers

Can you please tell me how to connect my Humax 9200T PVR to my Onkyo TX-SR608. The Humax does NOT have HDMI connections and the manual does not mention the connection of a PVR. The Humax Manual is of no...


You will need to purchase a scart to HDMI converter - available in the UK for about £40.

If you Google 'Scart to HDMI converter' you should find several options, which will be cheaper if you are in the US!

Unfortunately the Humax box you have only supports Scart A/V I/O, which is of course now obsolete.

Jan 17, 2011 | Onkyo TX-SR608 Receiver

1 Answer

Do i need a converter box for a samsung syncmaster 940 mw


It depends. What are you using the monitor for? If you want to watch digital TV, you need a digital to analog converter. (It has an NTSC tuner.) Note: the digital to analog converters that were subsidized by the US government coupon only gave SD out.

If you are connecting to a PC, it has DVI-D (21 pin SCART) and VGA connections (15 pin SCART). (An HDMI to DVI cable or adapter would connect to HDMI video cards.) Most other set-top boxes will connect to the component, composite or S-video connectors.

I hope this helps.

Cindy Wells

Jan 07, 2011 | Samsung SyncMaster 940MW 19" LCD Monitor

1 Answer

When connecting video or set-top box using composite video cable picture is black and white. If I use S-video I get colour. Video only has scart and tv only has composite/component/s video connectors so I...


you really cant convert to component. it defeats the whole purpose of upgrading your tv. with your tv you should be using hdmi to connect all your devices your cable box should deffinatly have one. any time you connect component to something else you will get black and white hdmi is totally digital where as component is still analog pluse you dont need audio cables with hdmi its just one digital cable

Sep 21, 2008 | Televison & Video

1 Answer

Yamaha RX-V363 input settings


HI,you are not getting picture because the yam 363 dose not upscale or convert the picture from the composite input to hdmi.You will have to put a video cable from the composite out put on the amp to a scart convertor into the tv or put console picture into the tv and sound to the amp.

hope this helps.
CABLE GUY.

Jul 17, 2008 | Yamaha RXV-350 Receiver

Not finding what you are looking for?
Fujitsu Siemens PlasmaVision P42VHA40 Monitor Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Ekse

Level 3 Expert

13434 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...