...OKI C9800. After replacing the waste toner cartridge and cleaning the toner transfer belt. I reinstalled the belt mechanism, and the toner drum units. Upon restarting the printer, I keep getting a ...
Oki Printer and Toner Sensing I have the above printer and it called for toner, inserted the toner, and it saying that the ID Unit is not installed and Toner Sensor Error. Cannot find anything in the
Question about C9300 Led Printer
...oki transfer belt is saying that it has run its course despite it has just been installed ( new) The waste toner bottle is on the underside of the transfere belt. Becareful when you unclip as it can ...
oki 9300 led printer transfer belt ( one message say it has 98 % life remaining) ( while the message says install new belt) Swith off the machine before installing new units. Also check for toner dust
...oki 3300 but its still saying its empty When installing the C3300 printer, or when replacing the toner cartridge, be sure to fully insert the toner cartridge into the image drum, and make sure the ...
...printer is dirty and not seeing the toner. With the toner there is a little wipe that says it is for cleaning the LED. There is an LED sensor that "reads" the presence of the toner. If this is dirty ...
...Oki B4350 keeps saying "paper jam, remove toner"...paper is not jammed though. Just wondering whether I've installed the toner incorrectly.Not sure if the 2 small pcs. of clear tape needs to be ...
Question about Oki C530dn Laser Printer Duplex Printing
...Toner cartridge defective? The drum may have an electronic counter installed and after so many pages being printed, even though it is still good, it will determine that it is time to replace. You may ...
Question about C5100n Laser Printer
...Toner Cartridge. Now it says the all the toners are missing Tried removing them all and replacing one by one but made no difference was black an original oki cartridge or a cheap one? it makes a ...
Question about C5100n Laser Printer
...Oki printer which starts up with error ? hi everybody, i had a problem with my oki MC332dn blanck vertical stripe for black text printing and read that the drum might be concerned ; so i tried to ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions