Questions & Answers for: moen spool valve removal

...spool is stuck, replacing it will solve the problem. The valve should look like this http://www.moen.ca/shared/pdf/3170pt.pdf . I have unstuck the spools in the past, soaking it in white vinegar will ...

Moen-Single handle shower -only hot water comes in Serge You need to replace the balancing spool in the valve, If you take the handle off and then the cover plate you will be able to see the valve. ...

...Moen brand cartridge? if yes then the problem is in the balancing spool which is located on the left side of the valve it is a round brass fitting with a slotted head you can remove spool while water ...

...moen bath /shower faucet which gives me no hot water. It worked alright in May but was left idle till today? Balancing spool is froze up. If it is a moentrol valve then it has a separate spool that ...

... only cold water comes out when turning to any side. It also appears that when turned to the maximum hot less water comes out. The faucet is a Moen posi-temp spool valve is clogged remove clean ...

...Moen's trouble shooting discussion: Typical Cause Debris or an obstruction in the balancing spool is causing it not to move freely within its housing. In some models, a lack of pressure feeding the ...

...spool and Moen cartridge. Look for and mineral buildup in side the faucet and on the spool or cartridge. If there is buildup on the spool and cartridge, place them in a large bowel with a cup of ...

...moen.com/shared/pdf/instruction_sheets/ins162e.pdf Balance Spool Maintenance The precise and instantaneous pressure control illustrated has been achieved through the balancing spool, which has been ...

...Moen and One handle tub and shower faucet, model # T3132. When I turn it on in the showers, there is no hot water... in both it gives me only cold water... even if I turn the handle to the right, ...

spool as well. Again, you will be looking for debris that is blocking water flow. If this is an older Moen faucet, you may just want to replace the cartridge while you have it removed. If it is a push