Questions & Answers for: hoover windtunnel overheating

windtunnel ultra U6425-900 stops running after 5 minutes we have replaced all filters and bags Sounds like its overheating and cutting out. This is normally caused by a blockage or blocked filers. ...

...a blockage in the vacuum system, and is cutting out from overheating. If you no longer have a manual, which will tell you about clearing blockages, you can download from the Hoover website. Good

HOOVER WINDTUNNEL SELF PROPELLED OVERHEATING AND SHUTTING OFF It sounds like it is overheating because of a blocked flow of air that keeps the motor cool. Check for a blockage from the area of the ...

shuts down after a few minutes of work make sure all filters are cleaned sounds like motor overheating...

Hoover U5780-900 Windtunnel a month 1/2 old just started stopping when it is running and wont turn back on for a few hours why? The motor has a thermal protection sensor on it. So your motor may be ...

...latter it stops again. Your Hoover is stopping because it is overheating. This is a sure sign that there is a blockage somewhere. Find the blockage and clear it, and that should solve the

on my Windtunnel Series T. It was full of junk packed in tight. After cleaning it out there's no more turning off or overheating. It actually works better than when I first got it (used from a friend)

...Hoover Windtunnel may have stopped working for several reasons. First, make sure that your unit is properly plugged into an electrical outlet and make sure the electrical outlet is working correctly. ...

...seen a reset button It may take a while to cool and reset. If ity has been over an hour the thermal switch could be faulty. Hoover WindTunnel WindTunnel vacuum cleaner Owner Manual Thermal ...

...over the motor. Overheating motor causing an automatic shutoff. This is most commonly caused by an air passage that is plugged by hair or dirt. Hoover WindTunnel 2 Rewind Troubleshooting - iFixit