20 Most Recent
Fuller Brush FBBLC Bagless Cyclonic Canister HEPA Vacuum Questions & Answers
I have a cannister vacume,
First, the word is "VACUUM." Second, it's obvoius that your motor is overheating. When's the last time you CLEANED THE FILTERS, per the operating instructions?
Why doesnt my Haan steamer turn on
If your Haan steamer is not turning on, there could be various reasons for this. Here are some troubleshooting procedures to assist you in identifying and maybe resolving the issue:
Check the Power Source: Make sure the steamer is plugged into a working power source. Check if the outlet is operational by using another device or appliance.
Inspect the Power Cord: Look for any visible damage, such as frayed or exposed wires, on the power cord. If there is any damage to the cord, do not use the steamer until it has been fixed or replaced.
Safety Locks and Buttons: Some steamers feature safety locks or buttons that must be engaged before the unit will turn on. Check the user handbook for any special instructions regarding these safety measures.
Water Reservoir: Ensure that the water reservoir is appropriately filled. Many steamers require water to generate steam, therefore they may not operate if the reservoir is empty or the water level is too low.
Safety systems: Some steamers have safety systems that prohibit them from starting if specific requirements are not satisfied. For example, the steamer may need to reach a certain temperature before it can be used. Allow the steamer some time to attain the required temperature.
Overheating Protection: If the steamer includes overheating protection, it will stop down briefly if it becomes too hot. Allow the steamer to cool before using it again.
A malfunctioning power switch or electrical circuitry could be the source of the problem. If you've examined all of the external causes and the steamer still won't switch on, it may need to be inspected and repaired by an expert.
I hope you can solve your problem.
9/10/2023 12:02:51 AM •
Vacuums
•
Answered
on Sep 10, 2023
Brush roller not rotating
Full 'make model (what it is)' is needed in all questions on Fixya please.
The drive belt is broken whether it is a standalone upright cleaner or whether it is a canister vacuum with a hose and wand with brush head.
How you replace it is completely dependent on make and model, but can easily be Googled or refer to the manual.
8/29/2023 2:52:16 AM •
Vacuums
•
Answered
on Aug 29, 2023
Not finding what you are looking for?
