Questions & Answers for: andis screw

Andis T-Outliner How do Adjust the blade so my lining would be shaper? I just got the and they are cutting alittle dull. adjust the brown plastic on the blade all the way up.remov the blade and the ...

...andis master clippers start out quiet but after running awhile they get loud. i tried turning the small screw clockwise and it doesn't work , help! adjust power screw in one quarter turn If you are ...

...ANDIS THEY ARE LOUD Turn the clipper on and with a screwdriver turn the screw on the side all the way clockwise. Next slowly turn the screw back the opposite direction until the clippers are running ...

andis are too loud Turn the clipper on and with a screwdriver turn the screw on the side counter clockwise until it is extremely loud. Next slowly turn the screw the opposite direction until the noise

how di adjust blades to make andis clippers sharper Take blades off clipper,loosen screws on blade, place on mirror, rest teeth against mirror, angle clipper at 1 oclock position, slowly titen screws

Opening the bace of magimix 5100 I want to get a torx tool for the torx button head pin screws on the magimix 5100 Do you know what size the screws are?Andy measured the width of the screw head and ...

Andis Speedmaster Model PM-1 HELP! I thought I knew how to service my own Andis Speedmaster hair trimmer...I unscrewed both screws and took of both detachable blades. As I tried putting them back, I ...

...andis Masters where working and they started making a loud sound and the blades stopped working. The Problem was there wasn't enough power. I used a screw driver and turn the power adjusting screw to ...

My Andis dog clipper mdl AGRC is running loud. What should I do, what is a power screw. running lound could be the blade drive assembly but I haven't heard of a power screw?

...screw. I can't figure out what it is! These are my andis masters. They are making this loud noise even when I turn the screw. I can't figure out what it is! it sounds like the plastic guide that ...