Questions & Answers for: align ge freezer door

GE Profile PSW26P Freezer door adjustment My freezer door does not shut tight. I have checked to make sure there are no obstuctions. It seems to be out of alignment. Is there any way to adjust it? thx

...ge-gsl25jfpd bs side of the fridge is not cooloing right. i have a thermometer in side and the temp. ranges from 42 to about 50 degrees . ive manually opened the door located in the freezer above the ...

GE Upright Freezer problem/door the door no longer makes swoosh vacuum sounds when closing. also the bottom of the freezer is thawing out. I did defrost the freezer, but this didn't help the problem. ...

GE side by side stays open slightly at top the freezer door doesn't align with the refrigerator door. it says slightly open at the top i have kenmore side by side model 52552100 and the ice maker will

...door must be moved to right as it rubs against freezer door at top. How do I adjust doors? Slotted screw on top of door, under a cover, needs to be loosened, adjust the door, tighten. That's

...GE profile counter depth french door refrigerator. It seems fine except that the doors (both top and the freezer door) do not swing shut. They have to be pushed to close properly. We tried adjusting ...

...GE model TFX24R refrigerator freezer makes a grinding noise when the door is closed, but stops immediately when door is opened even a crack. The noise does not start until the door is completely ...

...freezer door but cannot get it to seal. Possible that the alignment was not done properrly with the hinge settings. SO first of all release the hinge sccrews and adjust the seal part to coincide then ...

...freezer or frige stays open slightly Hi, Has the unit recently been moved or the doors removed at any time? Either the door are not aligned or they are damaged around the hinges some how. I would ...

freezer drawer does not seal and we get frost. The first technician replaced the door and gasket which did not solve the problem. The second technician added washers between the slide and the door to