When i turn my digital camera on with the memory card in it (XD M256mb) it says the card is full. I go to erase photos and it says there are no photos to erase. If i take the memory card out, i can take 15 pictures before the camera is full. How do i access the memory card?

is it a full restore? or a factory restore if so, live the card in the camera and do it then.

Yes you can, download a software to recover the photos inside your memory card. It is know as memory card recovery tool, search that in the internet.

yes you can use it very well. only thng you need to take care of is the XD card.. size uptp 4gb will work fine.,

Here are a couple of things that might be wrong. Your camera comes with what is called "internal memory" This is where your pictures will be stored if you don't have a XD card. One of the reasons your camera might be blinking is because that internal memory is full. If you don't have a XD card inserted in the slot that may be your problem. I would get your manual out and look up on how to transfer your photos from your camera to your computer or how to deleat them. I found this information on page 25 of the user manual for your camera. Page 31 shows how to erase the images. Hope this helps.

A card access error may indicate that an xD-Picture Card memory card is in a write-protected condition. xD-Picture Card memory cards have a special protection feature to ensure that your pictures are kept safe. NOTE: During this condition, you can still use the printer for printing and saving photos from the xD-Picture Card to a secure location, such as the computer hard drive. To resolve this error, try the following:

• Reinsert the xD-Picture Card memory card into your camera and turn on the camera. In most cases, the camera automatically makes the necessary changes.
• Reformat the xD-Picture Card memory card. See the documentation that came with your camera for instructions on reformatting the memory card. Note that this process erases the pictures currently saved to your memory card. To save these pictures, transfer them to the computer before reformatting the memory card. Once you reformat the memory card, transfer those photos back to the memory card using the computer.

Hi,

Try formatting with an external card reader and PC.

If you download the photos that are on the internal memory to your computer, the next time you take photos it should go to the memory card that is loaded. It worked for me, so I hope that helps

I bought a new memory card for my finepix A330 camera When I turned on the camera after putting in the new card, the screen read "card not initialized" and won't take photos.my son is going holidays 13/9/08 could you help me please Alex Richardson

the only way to prevent it is buy a XD card

Fuji Finepix S7000 Zoom Memory Cards (xD-Picture Card - M Type) & Accessories The following memory cards are compatible with your Fuji Finepix S7000 Zoom. Every memory card we offer is manufactured to the highest standard and carries a 2 year minimum warranty. Your Fuji Finepix S7000 Zoom accepts xD-Picture Card - M Type cards. The largest xD-Picture Card - M Type card you can use in your Fuji Finepix S7000 Zoom is 2048MB
View all Fuji Digital Cameras

Down load from www.konvar.com - PC Inspector - install the program and run it this will find your images