20 Most Recent Fuji FinePix S7000 Digital Camera Questions & Answers

I had a Finepix camera and on it was a feature for image stabilising. On the display it showed a hand. Have a look for it on the menu

Fuji FinePix... | Answered on Oct 29, 2018

Wipe the contact area of the memory card with a soft dry cloth. Most issues involving memory cards can
also be resolved by formatting the card. Detailed instructions can also be found in your camera's user manual.
or visit this website to solve your problem.https://googlesupport.co/youtube-support/

Fuji FinePix... | Answered on Aug 23, 2018

I have several cameras and had left my 1730 in an old house for a year. It had been in a bag with the lens cap on and no batteries, but the house left without heating over winter. When I put fully chaged batteries in it, I got a little motor noise but no lens movement. I thought this was the end of it but did #6 above, switching it on while banging the right (grip) side of the camera against my palm. After many times I saw that the lens was starting to move out and after about 10 more times it came out and started to operate. It then failed when I went to macro but it got better as I used it. Now it seems to be back to normal.

Fuji FinePix... | Answered on Jul 17, 2018

If the batteries are OK, then the shutdown has a simply-cured physical cause. Open the CF card door and look for a small square opening at the bottom of the door. Look inside this and there should be a small plastic 'plate' or flap. DO NOT TRY PUSHING IT WITH A PENCIL OR NEEDLE etc. The bad news is that if you DO see that flap inside the little square opening, then your problem probably lies elsewhere. But if what you see looks like the tip of a pencil, then THAT'S your problem. The flap is there to keep dust out. It's thickness is needed so that closing the door operates the switch. Without it, the door seems to be open and the camera shuts down. If you can find an alternative for that small plate, your problem should be solved. One solution is to attach a small (about 3mm square) piece of foam pad to the tip of the protrusion inside the square. A typical example for this type of foam pad is what scrapbookers fasten photos into their albums. There will be other solutions - but the loss of that flap will be the cause.

Fuji FinePix... | Answered on Jul 26, 2015

Try formatting the card with the camera menu. This is always safer when you buy a new card. If that doesn't work take the card back

Fuji FinePix... | Answered on Mar 16, 2015

looks like you have a dead ccd, reset your camera , if this does not help bang hard with back of your to the base of your camera, last resort take to service for change of ccd

Fuji FinePix... | Answered on Mar 05, 2015

With digital cameras you can only do so much. Making sure batteries are charged swapping out memory cards is about the limit of the consumer. If there is a chance it got slightly damp you you can try drying it out by begging it with some dry rice, put the camera in a cloth bag to keep the rice from finding the nooks.
With the problem you're having your best hope is a active warranty or even better did you buy a extended warranty. If the warranty is good go for it. Even if you don't have a warranty try talking customer service. If the problem you have is common the manufacturer may extend the warranty or provide the option of replacement with a refurbished item for a fixed price in exchange for your broken one. You can look at this link too, it may be of help:

Fuji FinePix... | Answered on Oct 07, 2014

Did you download the pics from the cards while they were in the camera or use something else? Sounds like you used MS camera wizard. That's where the problem probably happened. I'd say they're gone. But double check by using a device you insert the SD card into and then plug into your USB port on your PC and check the cards' contents that way.

Fuji FinePix... | Answered on Aug 27, 2014

Not likely it has a an extra battery, keeping you from starting up.
Just get out the batteries, charge them again (Yes again) and in the mean time, use some cotton swabs, to clean the contacts in the camera. Before you reinsert the batteries also clean the contacts on the batteries. Make sure you only use NiMH rechargeable and don't use NiCD batteries.
To test the camera, you could insert a set of new Alkaline batteries, but you will see they don't lats as long as the NiMH batteries.
Never use zinc carbon batteries in a camera.
Let me know how you go.


Fuji FinePix... | Answered on Aug 03, 2014

is your screen blurry? or is it trying to focus on something and that is what you are seeing. if the words are coming up blurry or mottled it is a screen issue, if the lens is going in and out trying to focus but can't then it is a lens issue.

Fuji FinePix... | Answered on Jul 17, 2014

Not finding what you are looking for?
Fuji FinePix S7000 Digital Camera Logo

498 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Brad Brown

Level 3 Expert

18455 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FinePix Fuji

  • FinePix Fuji

Most Popular Question

pictures not load pc

  • Cameras